Simerics帮助文档

  • Manual
  • Release Notes
    • Version 5.0
    • Version 5.1
    • Version 6.0
  • Getting Started
    • Contents of this Manual
    • Typographical Conventions
    • Running Simerics-MP/Simerics-MP+
    • File Formats
    • System of Units
  • GUI and Panels
    • Menu and Toolbar
    • Geometric Entities Panel
    • Properties Panel
    • Mesh Panel
    • Model Panel
    • Simulation Panel
    • Plot Panel
    • Results Panel
  • Geometry and Mesh
    • Geometry Preparation
      • Import/Export Geometry or Grid
      • Split/Combine Geometry or Grid
      • Transform Geometry or Grid
      • Grid and Geometry Information
    • Meshing
      • Introduction - Binary Tree Meshing
      • General Mesher
      • Template Mesh
    • Interface Creation
    • Mesh Movement
  • Physics Modules
    • Common
      • Definitions
      • Conditions
      • Output Variables
    • Flow
      • Definitions
      • Physics
        • Governing Equations
        • Flow Models
        • Modelling of Flow Boundaries
      • Conditions
        • Material Property
        • Noninertial Frame
        • Source
        • Boundary Conditions
        • Initial Condition and State
      • Output Variables
    • Turbulence
      • Definitions
      • Physics
        • Turbulence Models
        • Wall Physics
      • Conditions
        • Turbulent Viscosity
        • Initial Condition and Source
        • Boundary Conditions
      • Output Variables
    • Cavitation
      • Definitions
      • Physics
        • Governing Equations
        • Theory of Cavitation Model
        • Cavitation Models
        • Modeling of Cavitation Boundaries
      • Conditions
        • Material Property
        • Initial Condition and Source
        • Boundary Conditions
      • Output Variables
    • Multiphase
      • Definitions
      • Physics
        • Eulerian Models and Governing Equations
        • Special Considerations of VOF Model
        • Interface Mass Transfer
      • Numerical Considerations
      • Conditions
        • Material Property
        • Initial Condition
        • Boundary Conditions
      • Output Variables
    • Heat
      • Definitions
      • Physics
        • Governing Equations of Energy Conservation
        • Modelling of Heat Boundaries
      • Conditions
        • Material Property
        • Source
        • Boundary Conditions
        • Interface Conditions
        • Initial Condition and State
      • Output Variables
    • Radiation
      • Definitions
      • Physics
        • Characteristics of Thermal Radiation
        • Modelling of Radiative Heat Transfer
      • Conditions
        • Material Property
        • Source
        • Boundary Conditions
    • Multicomponent Mixing
      • Definition
      • Physics
      • Conditions
        • Material Property
        • Initial Condition and State
        • Boundary Conditions
      • Output Variables
    • Species
      • Definitions
      • Physics
      • Conditions
        • Material Property
        • Source
        • Boundary Conditions
      • Output Variables
    • Particle
      • Particle Physics
        • Discrete Particle Model
        • Particle Erosion Modeling
      • Particle Parameters
      • Boundary Conditions
      • Volume Conditions
      • Particle Output
    • Streamline
      • Physics
      • Boundary Conditions
      • Volume Conditions
      • Display Settings
    • Dynamics
      • Definitions
      • Physics
        • Motions of a Rigid Body
        • ODE Solver
      • Conditions
        • Translational
        • Rotational
        • Boundary Conditions
      • Output Variables
    • Acoustics
      • Module Parameters
      • Boundary/ Volume Conditions
      • Output Variables
  • Fluid Machinery Templates and Tutorials
    • Template Capabilities
    • Centrifugal Pump
      • Geometry and Domain
      • Model
        • Operating Parameters
        • Conditions
      • Centrifugal Pump Tutorials
        • Centrifugal Pump
          • Problem Overview
          • Setting up the model
            • Computational domain
            • Building the Mesh
            • Defining Physics and Conditions
          • Simulation
          • Post processing
            • Contours
            • Plots
            • Animations
        • Centrifugal Pump NPSHr
          • NPSHr Definition and Assumption
          • NPSHr Simulation
            • Step 1 – Creating the Steady and Transient Project Files
            • Step 2 – Providing the input parameters in a text file
            • Step 3 – Running the NPSHr script
            • Step 4 – Calculation of NPSHr
      • Turbo Postprocessor module
        • Boundary Condition
        • Turbo Postprocessor Module Parameters
        • Display Variables
    • Gerotor Pump
      • Geometry and Domain
      • Mesher
        • Gerotor chamber Meshing
        • Leakages
      • Model
        • Operating Parameters
        • Conditions
      • Gerotor Pump Tutorial
        • Problem Overview
        • Setting up the model
          • Computational domain
          • Building the Mesh
          • Defining Physics and Conditions
        • Simulation
        • Post processing
          • Contours
          • Plots
          • Animations
    • External Gear Pump
      • Geometry and Domain
      • Mesher
        • Gear chamber Meshing
        • Leakages
      • External Gear Pump Model
        • Operating Parameters
        • Conditions
      • External Gear Pump Tutorial
        • Problem Overview
        • Setting up the model
          • Computational domain
          • Building the Mesh
          • Defining Physics and Conditions
        • Simulation
        • Post processing
          • Contours
          • Plots
          • Animations
    • Vane Pump
      • Geometry and Domain
      • Mesher
        • Vane chamber meshing
        • Leakages
      • Model
        • Operating Parameters
        • Conditions
      • Vane Pump Tutorials
        • Fixed Vane Pump Tutorial
          • Problem Overview
          • Setting up the model
            • Computational domain
            • Building the Mesh
            • Defining Physics and Conditions
          • Simulation
          • Post processing
            • Contours
            • Plots
            • Animations
        • Variable Displacement Vane Pump Tutorial
          • Problem Overview
          • Setting up the model
            • Computational domain
            • Building the Mesh
            • Defining Physics and Conditions
          • Simulation
          • Post processing
            • Contours
            • Plots
            • Animations
    • Crescent Pump
      • Geometry and Domain
      • Mesher
        • Crescent Chamber Meshing
        • Leakages
      • Model
        • Operating Parameters
        • Conditions
      • Crescent Pump Tutorial
        • Problem Overview
        • Setting up the model
          • Computational domain
          • Building the Mesh
          • Defining Physics and Conditions
        • Simulation
        • Post processing
          • Contours
          • Plots
          • Animations
    • Radial Piston Pump
      • Geometry and Domain
      • Mesher
        • Radial Piston Meshing
      • Model
        • Operating Parameters
        • Conditions
      • Radial Piston Pump Tutorial
        • Problem Overview
        • Setting up the model
          • Computational domain
          • Building the Mesh
          • Defining Physics and Conditions
        • Simulation
        • Post processing
          • Contours
          • Plots
          • Animations
    • Swash Plate Piston Pump
      • Geometry and Domain
      • Swash Plate Piston Pump Mesher
        • Swash Plate Piston Meshing
        • Leakages
      • Swash Plate Piston Pump Model
        • Operating Parameters
        • Conditions
      • Swash Plate Piston Pump Tutorial
        • Problem Overview
        • Setting up the model
          • Computational domain
          • Building the Mesh
          • Defining Physics and Conditions
        • Simulation
        • Post processing
          • Contours
          • Plots
          • Animations
    • Bent Axis Piston Pump
      • Geometry and Domain
      • Mesher
        • Bent Axis Piston Meshing
        • Leakages
      • Model
        • Operating Parameters
        • Conditions
      • Bent Axis Piston Pump Tutorial
        • Problem Overview
        • Setting up the model
          • Computational domain
          • Building the Mesh
          • Defining Physics and Conditions
        • Simulation
        • Post processing
          • Contours
          • Plots
          • Animations
    • Translational Valve
      • Geometry and Domain
      • Mesher
      • Model
        • Operating Parameters
        • Conditions
      • Spool Valve Tutorial
        • Problem Overview
        • Setting up the model
          • Computational domain
          • Building the Mesh
          • Defining Physics and Conditions
        • Simulation
        • Post processing
          • Contours
          • Plots
          • Animations
    • Rotational Valve
      • Geometry and Domain
      • Mesher
      • Model
        • Operating Parameters
        • Conditions
      • Circumferential Valve Tutorial
        • Problem Overview
        • Setting up the model
          • Computational domain
          • Building the Mesh
          • Defining Physics and Conditions
        • Simulation
        • Post processing
          • Contours
          • Plots
          • Animations
    • Ball Valve
      • Geometry and Domain
      • Mesher
        • Ball Valve Meshing
      • Model
        • Operating Parameters
        • Conditions
      • Ball Valve Tutorial
        • Problem Overview
        • Setting up the model
          • Computational domain
          • Building the Mesh
          • Defining Physics and Conditions
        • Simulation
        • Post processing
          • Contours
          • Plots
          • Animations
      • Ball 3D Valve Tutorial
        • Problem Overview
        • Setting up the model
          • Computational domain
          • Building the Mesh
          • Defining Physics and Conditions
        • Simulation
        • Post processing
          • Contours
          • Plots
          • Animations
    • Rolling Piston
      • Geometry and Domain
      • Mesher
        • Rolling Piston Meshing
        • Leakages
      • Model
        • Operating Parameters
        • Conditions
      • Rolling Piston Compressor Tutorials
        • Rolling Piston Compressor with valve Tutorial
          • Problem Overview
          • Setting up the model
            • Computational domain
            • Building the Mesh
            • Defining Physics and Conditions
          • Simulation
          • Post processing
            • Contours
            • Plots
            • Animations
        • Rolling Piston Compressor with Real Gas Tutorial
          • Problem Overview
          • Setting up the model
            • Computational domain
            • Building the Mesh
            • Defining Physics and Conditions
          • Simulation
          • Post processing
            • Contours
            • Plots
            • Animations
    • Compartment Valve
      • Geometry and Domain
      • Compartment Valve Model
        • Ball Operating Parameters
        • Spool Operating Parameters
        • Conditions
    • Scroll Compressor
      • Geometry and Domain
      • Mesher
      • Model
        • Operating Parameters
        • Conditions
      • Scroll Compressor Tutorial
        • Problem Overview
        • Setting up the model
          • Computational domain
          • Building the Mesh
          • Defining Physics and Conditions
        • Simulation
        • Post processing
          • Contours
          • Plots
          • Animations
    • Progressive Cavity Pump
      • Geometry and Domain
      • Mesher
        • Progressive Cavity Meshing
      • Model
        • Operating Parameters
        • Conditions
      • Progressive Cavity Pump Tutorial
        • Problem Overview
        • Setting up the model
          • Building the Mesh
          • Defining Physics and Conditions
        • Simulation
        • Post processing
          • Contours
          • Plots
          • Animations
    • General Gear
      • Geometry and Domain
      • Mesher
        • General Gear Meshing
      • Model
        • Operating Parameters
      • General Gear Tutorials
        • Helical Gear Pump Tutorial
          • Problem Overview
          • Setting up the model
            • Computational Domain
            • Building the Mesh
            • Defining Physics and Conditions
          • Simulation
          • Post processing
            • Contours
            • Plots
            • Animations
  • Automotive Templates and Tutorials
    • Vehicle Template
      • Full Vehicle Modelling
        • Wind Tunnel
        • Fan Modelling
        • Heat Exchanger Modelling
      • Mesher
        • Component Meshing
        • Domain Mesh Parameters
        • Refinements
        • Interfaces
      • Model
        • Operating parameters
        • Conditions
      • Post-Processing
      • Vehicle FEAF Tutorial
        • Problem Overview
        • Setting up the model
          • Computational domain
          • Building the Mesh
          • Defining Physics and Conditions
        • Simulation
        • Post processing
          • Contours
          • Plots
          • Animations
          • Validation
      • Vehicle Underhood Thermal Tutorial
        • Problem Overview
        • Post processing
          • Contours
          • Plots
    • Fuel Tank Template
      • Geometry and Domain
      • Mesher
      • Model
        • Operating Parameters
        • Conditions
      • Fuel Tank Tutorials
        • Fuel Tank Sloshing
          • Problem Overview
          • Setting up the model
            • Building the Mesh
            • Defining Physics and Conditions
          • Simulation
          • Post processing
            • Contours
            • Plots
            • Animations
        • Fuel Tank Refuelling-Flip Valve
          • Problem Overview
          • Setting up the model
            • Computational domain
            • Building the Mesh
            • Defining Physics and Conditions
          • Simulation
          • Post processing
            • Contours
            • Plots
            • Animations
    • Automotive Tutorials
      • Journal Bearing Tutorial
        • Problem Overview
        • Setting up the model
          • Computational domain
          • Building the Mesh
          • Defining Physics and Conditions
        • Simulation
        • Post processing
          • Contours
          • Plots
          • Animations
      • Planetary Gearbox Tutorial
        • Problem Overview
        • Setting up the model
          • Computational Domain
          • Building the Mesh
          • Defining Physics and Conditions
        • Simulation
        • Post processing
          • Contours
          • Plots
          • Animations
      • Piston Cooling Tutorial
        • Problem Overview
        • Setting up the Fluid model
          • Computational domain
          • Building the Mesh
          • Defining Physics and Conditions
        • Setting up the Solid model
          • Computational domain
          • Building the Mesh
          • Defining Physics and Conditions
        • Simulation
        • Post processing
          • Contours
          • Plots
          • Animations
      • Windshield Defrost Tutorial
        • Problem Overview
        • Setting up the model
          • Computational domain
          • Building the Mesh
          • Defining Physics and Conditions
        • Simulation
        • Post processing
          • Contours
          • Plots
          • Animations
      • Coolant Filling System Tutorial
        • Problem overview
        • Post processing
          • Contours
          • Plots
          • Animations
      • Dual Heat Exchanger Tutorial
        • Problem overview
        • Setting up the model
          • Building the mesh
          • Defining physics and conditions
        • Simulation
        • Post processing
          • Contours
          • Plots
      • Water Wading Tutorial
        • Problem Overview
        • Post processing
          • Contours
          • Plots
          • Animations
      • Electric Motor Tutorial
        • Problem Overview
        • Post processing
          • Contours
          • Plots
  • Marine Templates and Tutorials
    • Marine Hull Template
      • Modelling Marine Vessel
        • Parts of a marine vessel
          • Hull
          • Deck
        • Geometric Entities
        • Measurements
        • Ship Motions
        • Wave Motions
        • Analysis Methods
          • Propeller Models
          • Propeller Performance
      • Setting up the model
        • Computational domain
        • Building the Mesh
        • Defining Physics
      • Simulation
      • Post processing
        • Contours
        • Plots
        • Animations
      • Marine Tutorials
        • Displacement Hull
          • Problem Overview
          • Setting up the model
            • Computational Domain
            • Building the Mesh
            • Defining Physics
          • Simulation
          • Post-processing
            • Contours
            • Plots
            • Animations
        • Planing Hull
          • Problem Overview
          • Setting up the model
            • Computational Domain
            • Building the Mesh
            • Defining Physics
          • Simulation
          • Post-processing
            • Contours
            • Plots
            • Animations
        • Self Propelled Boat
          • Problem Overview
          • Setting up the model
            • Computational domain
            • Building the Mesh
            • Defining Physics
          • Simulation
          • Post-processing
            • Contours
            • Plots
            • Animations
    • Propeller Template
      • Geometry and Domain
      • Model
        • Operating Parameters
        • Conditions
      • Propeller Tutorial
        • Problem Overview
        • Setting up the model
          • Computational domain
          • Building the Mesh
          • Defining Physics and Conditions
        • Simulation
        • Post processing
          • Contours
          • Plots
          • Animations
  • Optimization Module and Tutorial
    • Optimization of 2D Shape Tutorial
      • Problem Overview
      • Setting up the model
        • Preparation of CAD Surfaces
        • Building the Mesh
        • Defining Physics and Conditions
      • Simulation
      • Post processing
        • Contours
        • Plots
        • Animations
  • Additional Templates and Tutorials
    • Data Exchange Module and Tutorial
      • Data Exchange Module Tutorial
        • Problem Overview
        • Setting up the Fluid model
          • Computational domain
          • Building the Mesh
          • Defining Physics and Conditions
        • Setting up the Solid model
          • Computational domain
          • Building the Mesh
          • Defining Physics and Conditions
        • Coupled CHT Simulation
        • Post processing - Fluid side
          • Contours
          • Plots
        • Post processing - Solid side
          • Contours
          • Plots
          • Animations
    • PID Controller Template and Tutorial
      • PID Controller Tutorial
        • Problem Overview
        • Setting up the model
          • Computational domain
          • Building the Mesh
          • Defining Physics and Conditions
        • Simulation
        • Post processing
          • Contours
          • Plots
    • GT-SUITE Coupling Module and Tutorial
      • Setting up the CFD model
      • GT Coupling Module settings
      • Boundary and Interface settings
      • Running GT Coupled co-simulation
      • GT Coupling Tutorials
        • Multicomponent Flow
          • Problem Overview
          • GT-SUITE Setup
            • Specifying Fluid component
            • Specifying Interface conditions
            • Time Definition
          • Simerics-MP+ setup
            • Preparing the CFD Fluid model
            • Specifying GT Coupling settings
            • Fluid Component in CFD model
            • Boundary/Interface conditions
            • Running the co-simulation
          • Post-processing
        • Centrifugal Pump in a Coolant flow system
          • Problem Overview
          • GT-SUITE Setup
            • Specifying Fluid component
            • Specifying Interface conditions
            • Time Definition
          • Simerics-MP+ setup
            • Preparing the CFD Fluid model
            • Specifying GT Coupling settings
            • Fluid Component in CFD model
            • Boundary/Interface conditions
            • Running the co-simulation
          • Post-processing
            • Contours
            • Plots
  • Tutorials
    • Cyclone Separator
      • Problem Overview
      • Setting up the model
        • Computational domain
        • Building the Mesh
        • Defining Physics and Conditions
      • Simulation
      • Post processing
        • Contours
        • Plots
        • Animations
    • Power Inverter
      • Problem Overview
      • Setting up the model
        • Building the Mesh
        • Defining Physics and Conditions
      • Simulation
      • Post processing
        • Contours
        • Plots
        • Animations
    • EGR Cooler
      • Problem Overview
      • Setting up the model
        • Building the Mesh
        • Defining Physics and Conditions
      • Simulation
      • Post processing
        • Contours
        • Plots
        • Animations
    • Heated Disk
      • Problem Overview
      • Setting up the model
        • Building the Mesh
        • Defining Physics and Conditions
      • Simulation
      • Post processing
        • Contours
        • Plots
        • Animations
    • Tank Filling
      • Problem Overview
      • Setting up the model
        • Computational domain
        • Building the Mesh
        • Defining Physics and Conditions
      • Simulation
      • Post processing
        • Contours
        • Plots
        • Animations
    • Cabin Radiation
      • Problem Overview
      • Setting up the model
        • Building the Mesh
        • Defining Physics and Conditions
      • Simulation
      • Post processing
        • Contours
        • Plots
        • Animations
    • Multicomponent Mixing
      • Problem Overview
      • Setting up the model
        • Computational domain
        • Building the Mesh
        • Defining Physics and Conditions
      • Simulation
      • Post processing
        • Contours
        • Plots
        • Animations
    • External Aerodynamics
      • Problem Overview
      • Setting up the model
        • Building the Mesh
        • Defining Physics and Conditions
      • Simulation
      • Post processing
        • Contours
        • Plots
        • Animations
    • Natural Convection
      • Problem Overview
      • Setting up the model
        • Computational domain
        • Building the Mesh
        • Defining Physics and Conditions
      • Simulation
      • Post processing
        • Contours
        • Plots
        • Animations
        • Validation
    • Vortex Shedding
      • Problem Overview
      • Setting up the model
        • Computational domain
        • Building the Mesh
        • Defining Physics and Conditions
      • Simulation
      • Post processing
        • Contours
        • Plots
        • Animations
        • Validation
    • Cavitation Over an Orifice
      • Problem Overview
      • Setting up the model
        • Computational domain
        • Building the Mesh
        • Defining Physics and Conditions
      • Simulation
      • Post processing
        • Contours
        • Plots
        • Animations
        • Validation
    • Turbulent Flow in a Diffuser
      • Problem Overview
      • Setting up the model
        • Computational Domain
        • Building the Mesh
        • Defining Physics and Conditions
      • Simulation
      • Post processing
        • Contours
        • Plots
        • Validation
    • Mixing Tank
      • Problem Overview
      • Setting up the model
        • Computational domain
        • Building the Mesh
        • Defining Physics and Conditions
      • Simulation
      • Post processing
        • Contours
        • Plots
        • Animations
    • Sand Erosion
      • Problem Overview
      • Setting up the model
        • Computational domain
        • Building the Mesh
        • Defining Physics and Conditions
      • Simulation
      • Post processing
        • Contours
        • Plots
        • Animations
    • Rotating Machinery
      • Problem Overview
      • Setting up the model
        • Computational domain
        • Building the Mesh
        • Defining Physics and Conditions
      • Simulation
      • Post processing
        • Contours
        • Plots
        • Animations
    • Propeller Acoustics
      • Problem Overview
      • Setting up the Broadband Source Acoustic model
        • Computational domain
        • Building the Mesh
        • Defining Physics and Conditions
      • Simulation
      • Setting up the Ffowcs-Williams Hawkings (FWH) Acoustic model
        • Defining Physics and Conditions
      • Simulation
      • Post processing
        • Contours
        • Plots
        • Animations
  • Post-Processing
    • Cross-Sections and Monitoring Points
    • Grid, Contours and Vectors
    • Isosurface
    • Display Streamline
    • Particles
    • XY-Plots
    • Animations
    • Display Settings and Save Images
  • Expression Editor
    • Invoking the Expression Editor
    • Basics of Expression Editor
    • Functions
    • Variables
      • Global Variables
      • Module Related Variables
    • Examples
  • Numerics and Convergence
    • Theory
    • Numerics
    • Convergence
  • Tutorial Files and Location
  • List of Script and Text Files
  • FAQs
  • 手册
  • 发布说明
    • 版本 5.0
    • 版本5.1
    • 版本5.0
  • 入门指南
    • 本手册内容
    • 排版约定
    • 运行 Simerics-MP/Simerics-MP+
    • 文件格式
    • 单位制
  • GUI 与面板
    • 菜单和工具栏
    • 几何实体面板中
    • 属性面板
    • 网格面板
    • 模型面板
    • 仿真面板
    • 绘图面板
    • 结果面板
  • 几何与网格
    • 几何准备
      • 导入/导出几何或网格
      • 分割/组合几何或网格
      • 变换几何或网格
      • 网格与几何信息
    • 网格划分
      • 简介 - 二叉树网格划分
      • 通用网格生成器
      • 模板网格
    • 界面创建
    • 网格运动
  • 物理模块
    • 通用
      • 定义
      • 条件
      • 输出变量
    • 流动
      • 定义
      • 物理
        • 控制方程
        • 流动模型
        • 流动边界建模
      • 条件
        • 材料属性
        • 非惯性参考系
        • 源
        • 边界条件
        • 初始条件和状态
      • 输出变量
    • 湍流
      • 定义
      • 物理
        • 湍流模型
        • 壁面物理
      • 条件
        • 湍流粘度
        • 初始条件与源项
        • 边界条件
      • 输出变量
    • 空化
      • 定义
      • 物理
        • 控制方程
        • 空化模型理论
        • 空化模型
        • 空化边界的建模
      • 条件
        • 材料属性
        • 初始条件与源项
        • 边界条件
      • 输出变量
    • 多相
      • 定义
      • 物理
        • 欧拉模型与控制方程
        • VOF模型的特殊考虑
        • 界面传质
      • 数值考虑
      • 条件
        • 材料属性
        • 初始条件
        • 边界条件
      • 输出变量
    • 热量
      • 定义
      • 物理
        • 能量守恒控制方程
        • 热边界建模
      • 条件
        • 材料属性
        • 源
        • 边界条件
        • 界面条件
        • 初始条件和状态
      • 输出变量
    • 辐射
      • 定义
      • 物理
        • 热辐射的特性
        • 辐射传热建模
      • 条件
        • 材料属性
        • 源
        • 边界条件
    • 多组分混合
      • 定义
      • 物理
      • 条件
        • 材料属性
        • 初始条件和状态
        • 边界条件
      • 输出变量
    • 物种
      • 定义
      • 物理
      • 条件
        • 材料属性
        • 源
        • 边界条件
      • 输出变量
    • 粒子
      • 粒子物理学
        • 离散粒子模型
        • 颗粒侵蚀建模
      • 颗粒参数
      • 边界条件
      • 体积条件
      • 粒子输出
    • 流线
      • 物理
      • 边界条件
      • 体积条件
      • 显示设置
    • 动力学
      • 定义
      • 物理
        • 刚体的运动
        • ODE求解器
      • 条件
        • 3. 平移
        • 旋转
        • 边界条件
      • 输出变量
    • 声学
      • 模块参数
      • 边界/体积条件
      • 输出变量
  • 流体机械模板与教程
    • 模板功能
    • 离心泵
      • 几何与域
      • 模型
        • 运行参数
        • 条件
      • 离心泵教程
        • 离心泵
          • 问题概述
          • 设置模型
            • 计算域
            • 构建网格
            • 定义物理场和条件
          • 仿真
          • 后处理
            • 云图
            • 绘图
            • 动画
        • 离心泵NPSHr
          • NPSHr 定义与假设
          • NPSHr 模拟
            • 步骤1 – 创建稳态和瞬态项目文件
            • 步骤 2 – 在文本文件中提供输入参数
            • 步骤 3 – 运行 NPSHr 脚本
            • 步骤 4 – NPSHr 的计算
      • 涡轮后处理模块
        • 边界条件
        • 涡轮后处理模块参数
        • 显示变量
    • 摆线泵
      • 几何与域
      • 网格生成器
        • 摆线转子腔网格划分
        • 泄漏
      • 模型
        • 运行参数
        • 条件
      • 摆线泵教程
        • 问题概述
        • 设置模型
          • 计算域
          • 构建网格
          • 定义物理场和条件
        • 仿真
        • 后处理
          • 云图
          • 绘图
          • 动画
    • 外啮合齿轮泵
      • 几何与域
      • 网格生成器
        • 齿轮腔啮合
        • 泄漏
      • 外啮合齿轮泵模型
        • 运行参数
        • 条件
      • 外啮合齿轮泵教程
        • 问题概述
        • 设置模型
          • 计算域
          • 构建网格
          • 定义物理场和条件
        • 仿真
        • 后处理
          • 云图
          • 绘图
          • 动画
    • 叶片泵
      • 几何与域
      • 网格生成器
        • 叶片腔网格划分
        • 泄漏
      • 模型
        • 运行参数
        • 条件
      • 叶片泵教程
        • 定叶片泵教程
          • 问题概述
          • 设置模型
            • 计算域
            • 构建网格
            • 定义物理场和条件
          • 仿真
          • 后处理
            • 云图
            • 绘图
            • 动画
        • 变量排量叶片泵教程
          • 问题概述
          • 设置模型
            • 计算域
            • 构建网格
            • 定义物理场和条件
          • 仿真
          • 后处理
            • 云图
            • 绘图
            • 动画
    • 月牙泵
      • 几何与域
      • 网格生成器
        • 新月腔网格划分
        • 泄漏
      • 模型
        • 运行参数
        • 条件
      • 新月泵教程
        • 问题概述
        • 设置模型
          • 计算域
          • 构建网格
          • 定义物理场和条件
        • 仿真
        • 后处理
          • 云图
          • 绘图
          • 动画
    • 径向柱塞泵
      • 几何与域
      • 网格生成器
        • 径向柱塞网格划分
      • 模型
        • 运行参数
        • 条件
      • 径向柱塞泵教程
        • 问题概述
        • 设置模型
          • 计算域
          • 构建网格
          • 定义物理场和条件
        • 仿真
        • 后处理
          • 云图
          • 绘图
          • 动画
    • 斜盘式柱塞泵
      • 几何与域
      • 斜盘柱塞泵网格生成器
        • 斜盘柱塞网格划分
        • 泄漏
      • 斜盘柱塞泵模型
        • 运行参数
        • 条件
      • 斜盘式柱塞泵教程
        • 问题概述
        • 设置模型
          • 计算域
          • 构建网格
          • 定义物理场和条件
        • 仿真
        • 后处理
          • 云图
          • 绘图
          • 动画
    • 斜轴式柱塞泵
      • 几何与域
      • 网格生成器
        • 斜轴活塞啮合
        • 泄漏
      • 模型
        • 运行参数
        • 条件
      • 斜轴式柱塞泵教程
        • 问题概述
        • 设置模型
          • 计算域
          • 构建网格
          • 定义物理场和条件
        • 仿真
        • 后处理
          • 云图
          • 绘图
          • 动画
    • 平移阀
      • 几何与域
      • 网格生成器
      • 模型
        • 运行参数
        • 条件
      • 滑阀教程
        • 问题概述
        • 设置模型
          • 计算域
          • 构建网格
          • 定义物理场和条件
        • 仿真
        • 后处理
          • 云图
          • 绘图
          • 动画
    • 旋转阀
      • 几何与域
      • 网格生成器
      • 模型
        • 运行参数
        • 条件
      • 周向阀教程
        • 问题概述
        • 设置模型
          • 计算域
          • 构建网格
          • 定义物理场和条件
        • 仿真
        • 后处理
          • 云图
          • 绘图
          • 动画
    • 球阀
      • 几何与域
      • 网格生成器
        • 球阀网格划分
      • 模型
        • 运行参数
        • 条件
      • 球阀教程
        • 问题概述
        • 设置模型
          • 计算域
          • 构建网格
          • 定义物理场和条件
        • 仿真
        • 后处理
          • 云图
          • 绘图
          • 动画
      • 球阀3D教程
        • 问题概述
        • 设置模型
          • 计算域
          • 构建网格
          • 定义物理场和条件
        • 仿真
        • 后处理
          • 云图
          • 绘图
          • 动画
    • 滚动活塞
      • 几何与域
      • 网格生成器
        • 滚动活塞网格划分
        • 泄漏
      • 模型
        • 运行参数
        • 条件
      • 滚动活塞压缩机教程
        • 带阀门的滚动活塞压缩机教程
          • 问题概述
          • 设置模型
            • 计算域
            • 构建网格
            • 定义物理场和条件
          • 仿真
          • 后处理
            • 云图
            • 绘图
            • 动画
        • 使用真实气体的滚动活塞压缩机教程
          • 问题概述
          • 设置模型
            • 计算域
            • 构建网格
            • 定义物理场和条件
          • 仿真
          • 后处理
            • 云图
            • 绘图
            • 动画
    • 隔室阀
      • 几何与域
      • 隔室阀型号
        • 球阀操作参数
        • 阀芯操作参数
        • 条件
    • 涡旋压缩机
      • 几何与域
      • 网格生成器
      • 模型
        • 运行参数
        • 条件
      • 涡旋压缩机教程
        • 问题概述
        • 设置模型
          • 计算域
          • 构建网格
          • 定义物理场和条件
        • 仿真
        • 后处理
          • 云图
          • 绘图
          • 动画
    • 螺杆泵
      • 几何与域
      • 网格生成器
        • 渐进式腔体网格划分
      • 模型
        • 运行参数
        • 条件
      • 渐进式腔体泵教程
        • 问题概述
        • 设置模型
          • 构建网格
          • 定义物理场和条件
        • 仿真
        • 后处理
          • 云图
          • 绘图
          • 动画
    • 通用齿轮
      • 几何与域
      • 网格生成器
        • 通用齿轮啮合
      • 模型
        • 运行参数
      • 通用齿轮教程
        • 斜齿轮泵教程
          • 问题概述
          • 设置模型
            • 计算域
            • 构建网格
            • 定义物理场和条件
          • 仿真
          • 后处理
            • 云图
            • 绘图
            • 动画
  • 汽车模板与教程
    • 车辆模板
      • 整车建模
        • 风洞
        • 风扇建模
        • 热交换器建模
      • 网格生成器
        • 部件网格划分
        • 域网格参数
        • 细化
        • 接口
      • 模型
        • 操作参数
        • 条件
      • 后处理
      • 车辆FEAF教程
        • 问题概述
        • 设置模型
          • 计算域
          • 构建网格
          • 定义物理场和条件
        • 仿真
        • 后处理
          • 云图
          • 绘图
          • 动画
          • 验证
      • 车辆机舱热管理教程
        • 问题概述
        • 后处理
          • 云图
          • 绘图
    • 燃油箱模板
      • 几何与域
      • 网格生成器
      • 模型
        • 运行参数
        • 条件
      • 燃油箱教程
        • 燃油箱晃动
          • 问题概述
          • 设置模型
            • 构建网格
            • 定义物理场和条件
          • 仿真
          • 后处理
            • 云图
            • 绘图
            • 动画
        • 燃油箱加油-翻转阀
          • 问题概述
          • 设置模型
            • 计算域
            • 构建网格
            • 定义物理场和条件
          • 仿真
          • 后处理
            • 云图
            • 绘图
            • 动画
    • 汽车教程
      • 滑动轴承教程
        • 问题概述
        • 设置模型
          • 计算域
          • 构建网格
          • 定义物理场和条件
        • 仿真
        • 后处理
          • 云图
          • 绘图
          • 动画
      • 行星齿轮箱教程
        • 问题概述
        • 设置模型
          • 计算域
          • 构建网格
          • 定义物理场和条件
        • 仿真
        • 后处理
          • 云图
          • 绘图
          • 动画
      • 活塞冷却教程
        • 问题概述
        • 设置流体模型
          • 计算域
          • 构建网格
          • 定义物理场和条件
        • 设置固体模型
          • 计算域
          • 构建网格
          • 定义物理场和条件
        • 仿真
        • 后处理
          • 云图
          • 绘图
          • 动画
      • 挡风玻璃除霜教程
        • 问题概述
        • 设置模型
          • 计算域
          • 构建网格
          • 定义物理场和条件
        • 仿真
        • 后处理
          • 云图
          • 绘图
          • 动画
      • 冷却液加注系统教程
        • 问题概述
        • 后处理
          • 云图
          • 绘图
          • 动画
      • 双换热器教程
        • 问题概述
        • 设置模型
          • 构建网格
          • 定义物理场和条件
        • 仿真
        • 后处理
          • 云图
          • 绘图
      • 涉水教程
        • 问题概述
        • 后处理
          • 云图
          • 绘图
          • 动画
      • 电动马达教程
        • 问题概述
        • 后处理
          • 云图
          • 绘图
  • 船舶模板与教程
    • 船舶船体模板
      • 船舶建模
        • 船舶的组成部分
          • 船体
          • 甲板
        • 几何实体
        • 测量
        • 船舶运动
        • 波浪运动
        • 分析方法
          • 螺旋桨模型
          • 螺旋桨性能
      • 设置模型
        • 计算域
        • 构建网格
        • 定义物理
      • 仿真
      • 后处理
        • 云图
        • 绘图
        • 动画
      • 船舶教程
        • 排水型船体
          • 问题概述
          • 设置模型
            • 计算域
            • 构建网格
            • 定义物理
          • 仿真
          • 后处理
            • 云图
            • 绘图
            • 动画
        • 滑行艇
          • 问题概述
          • 设置模型
            • 计算域
            • 构建网格
            • 定义物理
          • 仿真
          • 后处理
            • 云图
            • 绘图
            • 动画
        • 自航船
          • 问题概述
          • 设置模型
            • 计算域
            • 构建网格
            • 定义物理
          • 仿真
          • 后处理
            • 云图
            • 绘图
            • 动画
    • 螺旋桨模板
      • 几何与域
      • 模型
        • 运行参数
        • 条件
      • 螺旋桨教程
        • 问题概述
        • 设置模型
          • 计算域
          • 构建网格
          • 定义物理场和条件
        • 仿真
        • 后处理
          • 云图
          • 绘图
          • 动画
  • 优化模块与教程
    • 二维形状优化教程
      • 问题概述
      • 设置模型
        • CAD曲面的准备
        • 构建网格
        • 定义物理场和条件
      • 仿真
      • 后处理
        • 云图
        • 绘图
        • 动画
  • 附加模板与教程
    • 数据交换模块与教程
      • 数据交换模块教程
        • 问题概述
        • 设置流体模型
          • 计算域
          • 构建网格
          • 定义物理场和条件
        • 设置固体模型
          • 计算域
          • 构建网格
          • 定义物理场和条件
        • 耦合CHT仿真
        • 后处理 - 流体侧
          • 云图
          • 绘图
        • 后处理 - 固体侧
          • 云图
          • 绘图
          • 动画
    • PID控制器模板与教程
      • PID 控制器教程
        • 问题概述
        • 设置模型
          • 计算域
          • 构建网格
          • 定义物理场和条件
        • 仿真
        • 后处理
          • 云图
          • 绘图
    • GT-SUITE 耦合模块与教程
      • 设置CFD模型
      • GT耦合模块设置
      • 边界与接口设置
      • 运行GT耦合协同仿真
      • GT耦合教程
        • 多组分流动
          • 问题概述
          • GT-SUITE 设置
            • 指定流体组分
            • 指定接口条件
            • 时间定义
          • Simerics-MP+设置
            • 准备CFD流体模型
            • 指定GT耦合设置
            • CFD模型中的流体组件
            • 边界/界面条件
            • 运行联合仿真
          • 后处理
        • 冷却液流动系统中的离心泵
          • 问题概述
          • GT-SUITE 设置
            • 指定流体组分
            • 指定接口条件
            • 时间定义
          • Simerics-MP+设置
            • 准备CFD流体模型
            • 指定GT耦合设置
            • CFD模型中的流体组件
            • 边界/界面条件
            • 运行联合仿真
          • 后处理
            • 云图
            • 绘图
  • 教程
    • 旋风分离器
      • 问题概述
      • 设置模型
        • 计算域
        • 构建网格
        • 定义物理场和条件
      • 仿真
      • 后处理
        • 云图
        • 绘图
        • 动画
    • 功率逆变器
      • 问题概述
      • 设置模型
        • 构建网格
        • 定义物理场和条件
      • 仿真
      • 后处理
        • 云图
        • 绘图
        • 动画
    • EGR冷却器
      • 问题概述
      • 设置模型
        • 构建网格
        • 定义物理场和条件
      • 仿真
      • 后处理
        • 云图
        • 绘图
        • 动画
    • 加热盘
      • 问题概述
      • 设置模型
        • 构建网格
        • 定义物理场和条件
      • 仿真
      • 后处理
        • 云图
        • 绘图
        • 动画
    • 油箱加注
      • 问题概述
      • 设置模型
        • 计算域
        • 构建网格
        • 定义物理场和条件
      • 仿真
      • 后处理
        • 云图
        • 绘图
        • 动画
    • 舱室辐射
      • 问题概述
      • 设置模型
        • 构建网格
        • 定义物理场和条件
      • 仿真
      • 后处理
        • 云图
        • 绘图
        • 动画
    • 多组分混合
      • 问题概述
      • 设置模型
        • 计算域
        • 构建网格
        • 定义物理场和条件
      • 仿真
      • 后处理
        • 云图
        • 绘图
        • 动画
    • 外部空气动力学
      • 问题概述
      • 设置模型
        • 构建网格
        • 定义物理场和条件
      • 仿真
      • 后处理
        • 云图
        • 绘图
        • 动画
    • 自然对流
      • 问题概述
      • 设置模型
        • 计算域
        • 构建网格
        • 定义物理场和条件
      • 仿真
      • 后处理
        • 云图
        • 绘图
        • 动画
        • 验证
    • 涡街脱落
      • 问题概述
      • 设置模型
        • 计算域
        • 构建网格
        • 定义物理场和条件
      • 仿真
      • 后处理
        • 云图
        • 绘图
        • 动画
        • 验证
    • 孔板空化
      • 问题概述
      • 设置模型
        • 计算域
        • 构建网格
        • 定义物理场和条件
      • 仿真
      • 后处理
        • 云图
        • 绘图
        • 动画
        • 验证
    • 扩散器中的湍流
      • 问题概述
      • 设置模型
        • 计算域
        • 构建网格
        • 定义物理场和条件
      • 仿真
      • 后处理
        • 云图
        • 绘图
        • 验证
    • 混合罐
      • 问题概述
      • 设置模型
        • 计算域
        • 构建网格
        • 定义物理场和条件
      • 仿真
      • 后处理
        • 云图
        • 绘图
        • 动画
    • 砂蚀
      • 问题概述
      • 设置模型
        • 计算域
        • 构建网格
        • 定义物理场和条件
      • 仿真
      • 后处理
        • 云图
        • 绘图
        • 动画
    • 旋转机械
      • 问题概述
      • 设置模型
        • 计算域
        • 构建网格
        • 定义物理场和条件
      • 仿真
      • 后处理
        • 云图
        • 绘图
        • 动画
    • 螺旋桨声学
      • 问题概述
      • 设置宽带声源声学模型
        • 计算域
        • 构建网格
        • 定义物理场和条件
      • 仿真
      • 设置Ffowcs-Williams Hawkings (FWH)声学模型
        • 定义物理场和条件
      • 仿真
      • 后处理
        • 云图
        • 绘图
        • 动画
  • 后处理
    • 截面与监测点
    • 网格、等值线和矢量
    • 等值面
    • 显示流线
    • 粒子
    • XY-图
    • 动画
    • 显示设置与保存图像
  • 表达式编辑器
    • 调用表达式编辑器
    • 表达式编辑器基础
    • 函数
    • 变量
      • 全局变量
      • 模块相关变量
    • 示例
  • 数值与收敛
    • 理论
    • 数值
    • 收敛
  • 教程文件及位置
  • 脚本和文本文件列表
  • 常见问题解答
首页 官网 App下载 知识库 项目展示 小卖部