数值流体求解参考书目

[208]
Chiron, L., Oger,G., de Leffe, M., and Le Touzé,D.2018."Analysis and improvements of Adaptive Particle Refinement (APR) through CPU time, accuracy and robustness considerations", Journal of Computational Physics, 354, pp. 552-575.

[209]
Baaijens, F. P. T. 1998."Mixed finite element methods for viscoelastic flow analysis: a review, J. Non-Newton Fluid, 79, pp. 361-385.

[210]
Babuska, I. 1973."The finite element method with Lagrangian multipliers", J. Rheol., 20, pp. 179-192.

[211]
Babuska, I. 1971." Error-bounds for finite element method" , Numerische Mathematik, 16, pp. 322-333.

[212]
Bird, R.B., Armstrong, R.C, Hassager, Ole.1987.Dynamics of Polymeric Liquids, I-II.John Wiley & Sons, New York.

[213]
Bird, R.B., Stewart, W.E., and Lightfoot, E.N.1966.“Transport Phenomena”.John Wiley & Sons, New York.

[214]
Brezzi, F. 1974." On the existence, uniqueness and approximation of saddle-point problems arising from lagrangian multipliers", ESAIM: Mathematical Modelling and Numerical Analysis, 8, pp. 129-151.

[215]
Brooks, A. N. and Hughes, T. J. R. 1982." Streamline upwind/Petrov-Galerkin formulations for convection dominated flows with particular emphasis on the incompressible Navier-Stokes equations" , Comput.Methods in Appl.Mech.Eng., 32, pp. 199-259.

[216]
Burton,T., Jenkins, N., Sharpe, D., Bossanyi, E. 2011.“Wind Energy Handbook”, 2nd ed., Wiley.

[217]
Bush, M. B., Tanner, R. I. and Phan-Thien, N.1985." A boundary element investigation of extrudate swell", J. Non-Newton.Fluid, 18, pp. 143-162.

[218]
Bush, M. B. and Tanner, R. I. 1983." Numerical solution of viscous flows using integral equation methods", Int. J. Numer.Meth.Fl., 3, pp. 71-92.

[219]
Chima, R.V., and Liou, M.-S. 2003.“Comparison of the AUSM+ and H-CUSP Schemes for Turbomachinery Applications”, NASA/TM-2003-212457.

[220]
Chiron, L., de Leffe, M., Oger, G., and Le Touzé, D. 2018."Fast and accurate SPH modelling of 3D complex wall boundaries in viscous and non-viscous flows", Computer Physics Communications, 234, 08.

[221]
Crochet, M. J. and Walters, K. and Davies, A. R., 1984.“Numerical simulation of non-Newtonian flow”, Elsevier Amsterdam ; New York.

[222]
Darwish M.S. and Moukalled F. 1994.“Normalized Variable and Space Formulation Methodology for High-Resolution Schemes”, Num.Heat Trans., Part B, 26 pp. 79-107.

[223]
Debbaut, B., Marchal, J.M., Crochet, M.J.1995."Viscoelastic effects in film casting", Theoretical, Experimental, and Numerical Contributions to the Mechanics of Fluids and Solids, pp. 679-698.

[224]
Demirdzic, I., Lilek, Z., and Peric, M. 1993.“A collocated finite volume method for predicting flows at all speeds”, Int. J. for Numerical Methods in Fluids, 16, pp. 1029-1050.

[225]
Demirdzic, I. and Muzaferija, S. 1995.“Numerical method for coupled fluid flow, heat transfer and stress analysis using unstructured moving meshes with cells of arbitrary topology”, Comput.Methods Appl.Mech.Eng., pp. 1-21.

[226]
Ferziger, J.H. and Peric, M. 2002.“Computational Methods for Fluid Dynamics”, 3rd rev. ed., Springer-Verlag, Berlin.

[227]
Giles, M.B.1988.“Non-reflecting boundary conditions for the Euler equations”, CFDL Report 88-1, MIT Dept. of Aero. and Astro.

[228]
Giles, M.B.1990.“Non-reflecting boundary conditions for Euler equation calculations”, AIAA Journal, 28(12):2050-2058.

[229]
Giles, M.B.1991 “UNSFLO: A numerical method for unsteady flow in turbomachinery”, Gas Turbine Laboratory Report GTL 205, MIT Dept. of Aero. and Astro.

[230]
Gingold, R.A., Moghan, J.J., 1977."Smoothed particle hydrodynamics: theory and application to non-spherical stars ", Monthly Notices of the Royal Astronomical Society, 181, pp. 375-381.

[231]
Giraud, L., d'Humières, D. and Lallemand, P. 1998.“A lattice Boltzmann model for Jeffreys viscoelastic fluid”, Eur.Phys.Lett., 42, pp. 625

[232]
Gnoffo, P. A., Gupta, R. N., and Shinn, J. L. 1989.“Conservation Equations and Physical Models for Hypersonic Air Flows in Thermal and Chemical Nonequilibrium”, NASA TP-2867.

[233]
Graboski, M. S. and Daubert, T. E. 1978.“A Modified Soave Equation of State for Phase Equilibrium Calculations: Hydrocarbon Systems”, Ind. Eng. Chem.Process Des.Dev., 17(4), pp. 443-448.

[234]
Graboski, M. S. and Daubert, T. E. 1978.“A Modified Soave Equation of State for Phase Equilibrium Calculations: Systems Containing CO2, H2S, N2, and CO”, Ind. Eng. Chem.Process Des.Dev., 17(4), pp. 448-454.

[235]
Guénette, R. and Fortin, M. 1995." A new mixed finite element method for computing viscoelastic flows", J. Non-Newton.Fluid, 60, pp. 27-52.

[236]
Gupta, R. N., Lee, K. P., Thompson, R. A., and Yos, J. M. 1991.“Calculations and Curve Fits of Thermodynamic and Transport Properties for Equilibrium Air to 30000 K”, NASA STI/Recon Technical Report N, 92, 11285.

[237]
Hansen, M. 2007.“Aerodynamics of Wind Turbines, 2nd ed. Routledge.

[238]
Hosangadi, A., Sachdev, J. , Sankaran, V. 2012."Improved Flux Formulations for Unsteady Low Mach Number Flows".ICCFD7 proceedings.

[239]
Howard, A., Tartakovsky, A. 2021." A conservative level set method for N-phase flows with a free-energy-based surface tensions model", J. Computational Physics, 426, 109955.

[240]
Applicability of the Forchheimer Equation for Non-Darcy Flow in Porous Media”.SPE Journal, March 2008, pp. 112-122.

[241]
Hughes, T. J. R.,Franca, L. P. and Balestra, M. 1986." A new finite element formulation for computational fluid dynamics: V. Circumventing the Babuska-Brezzi condition: a stable Petrov-Galerkin formulation of the stokes problem accommodating equal-order interpolations", Comput.Methods in Appl.Mech.Eng., 59, pp. 85-99.

[242]
Hughes, T. J. R. and Franca, L. P. 1987." A new finite element formulation for computational fluid dynamics: VII.The stokes problem with various well-posed boundary conditions: Symmetric formulations that converge for all velocity/pressure spaces", Comput.Methods in Appl.Mech.Eng., 65, pp. 85-96.

[243]
International Association for the Properties of Water and Steam.2007.Revised Release on the IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam, IAPWS Secretariat, Lucerne, Switzerland.(available at www.iapws.org).

[244]
Issa, R. I. , Gosman, A. D., and Watkins, A. P., 1986."The Computation of Compressible and Incompressible Recirculating Flows by a Non-Iterative Implicit Scheme," J. Computational Physics, 62(1).

[245]
Jameson, A., Schmidt, W. and Turkel, E. 1981.“Numerical solution of the Euler equations by finite volume methods using Runge-Kutta time stepping schemes”, AIAA Paper 81-1259.

[246]
Ladyzhenskaya, O. A. 1963." The Mathematical Theory of Viscous Incompressible Flow" , Gordon and Breach.

[247]
Lafaurie, B., A. 1994." Modelling Merging and Fragmentation in Multiphase Flows with SURFER*" , J. for Computational Physics, 113, 134-147.

[248]
Legat, V., Marchal, J.M.1992."Predictions of threedimensional general shape extrudates by an implicit iterative scheme," Int. J. for Numerical Methods in Fluids, 14, 609-625.

[249]
Leonard, B. P. 1991.“The ULTIMATE conservative difference scheme applied to unsteady one-dimensional advection”, Comp.Methods in Applied Mechanics and Engineering, 88 pp. 17-74.

[250]
Liou, M.-S. 1996.“A Sequel to AUSM: AUSM+”, J. Comput.Phys., 129: 364-382.

[251]
Liou, M.-S. 2001.“Ten Years in the Making--AUSM-Family”, AIAA 2001-2521.

[252]
Lockwood, B. A. 2012.“Gradient-based Approaches for Sensitivity Analysis and Uncertainty Quantification within Hypersonic Flows”, Ph.D.Dissertation, University of Wyoming.

[253]
Loehmer, R. 2009.“On Limiters for Minimal Vorticity Dissipation”, AIAA 2009-135.

[254]
Lucy, L.B, 1977, "A numerical approach to the testing of the fission hypothesis.", Astronomical Journal, 82, pp.1013-1024.

[255]
Lynn, N. and Steinhoff, J. 2007.“Large Reynolds Number Turbulence Modeling with Vorticity Confinement”, AIAA 2007-3965.

[256]
Makkonen, L. 2000.“Models for the growth of rime, glaze, icicles and wet snow on structures.”Phil.Trans.R. Soc.Lond.A, 358, pp. 2913-2939.

[257]
Manwell, J.F., McGowan, J., and Rogers, A. 2009.“Wind Energy Explained: Theory, Design and Application”, 2nd ed. Wiley.

[258]
Mathur, S.R. and Murthy, J.Y.1997.“Pressure-based method for unstructured meshes”, Numerical Heat Transfer, Part B: Fundamentals, 31(2), pp. 195-214.

[259]
Mathur, S.R. and Murthy, J.Y.1997.“Pressure boundary conditions for incompressible flow using unstructured meshes”, Numerical Heat Transfer, Part B: Fundamentals, 32(3), pp. 283-298.

[260]
Monaghan, J.J.1994."Simulating Free Surface Flows with SPH", Journal of Computational Physics, 110, pp. 399-406.

[261]
Morris, J.P., Fox, J.P., and Zhu, J., 1997."Modeling Low Reynolds Number Incompressible Flows Using SPH", Journal of Comp.Physics, 136, pp. 214-226.

[262]
Murthy, J. Y. 2002.“Numerical Methods in Heat, Mass and Momentum Transfer”, Draft Notes, School of Mechanical Engineering, Purdue University.

[263]
Oliveira, P. J., Pinho, F. T. and Pinto, G. A., G. 1998.“Numerical simulation of non-linear elastic flows with a general collocated finite-volume method”, J. Non-Newton Fluid, 79, pp. 1-43.

[264]
Olsson, E., Kreiss, G., and Zahedi, S. 2007." A conservative level set method for two phase flow", J. Computational Physics, 225(1), pp. 225-246.

[265]
Olsson, E., Kreiss, G., and Zahedi, S. 2007." A conservative level set method for two phase flow II", J. Computational Physics, 225(1), pp. 785-807.

[266]
Osher S., Sethian, J. 1998."Fronts propagating with curvature-dependent speed: Algorithms based on Hamilton-Jacobi formulations", J. Computational Physics, 79, pp. 12-49-+.

[267]
Peric, M., Kressler, R., and Scheuerer, G. 1988.“Comparison of finite-volume numerical methods with staggered and colocated grids”, Computers & Fluids, 16(4), pp. 389-403.

[268]
Poling, B. E., Prausnitz, J. M., and O'Connell, J. P., “The Properties of Gases & Liquids”, 5th Ed., McGraw-Hill, 2001.

[269]
Rajagopalan, D., Armstrong, R.C., Brown, R.A.1990."Finite element methods for calculation of steady viscoelastic flow using constitutive equations with a Newtonian viscosity", J. Non-Newtonian Fluid Mech., 36, pp 159-192.

[270]
Rajagopalan, R.G.1993.“Three Dimensional Analysis of a Rotor in Forward Flight”, Journal of the American Helicopter Society, Vol. 38.

[271]
Reid, R. C., Prausnitz, J. M., and Poling, B. E. 1987.“The Properties of Gases & Liquids”, 4th Ed., McGraw-Hill.

[272]
Ruschak, K. J. 1980."A method for incorporating free boundaries with surface tension in finite element fluid-flow simulators",International Journal for Numerical Methods in Engineering, 15:5, pp 639-648.

[273]
Saxer, A.P.1992.“A numerical analysis of three-dimensional inviscid rotor/stator interactions using non-reflecting boundary conditions”, Ph.D.Thesis.MIT Dept. of Aero. and Astro.

[274]
Saad, Y. 2003.“Iterative Methods for Sparse Linear Systems”, 2nd ed., Society for Industrial and Applied Mathematics

[275]
Shakib, F., Hughes, T. J. R. and Johan, Z. 1991." Second World Congress on Computational Mechanics A new finite element formulation for computational fluid dynamics: X. The compressible Euler and Navier-Stokes equations" , Comput.Methods in Appl.Mech.Eng., 89, pp. 141-219.

[276]
Shakib Tezduyar_Rev, Tezduyar_PSPG

[277]
Skillen, A., Lind, S., Stansby, P.K., and Rogers, D.B.2013.“Incompressible smoothed particle hydrodynamics (SPH) with reduced temporal noise and generalised Fickian smoothing applied to body–water slam and efficient wave–body interaction”, Comput.Methods in Appl.Mech.Eng., 265, pp. 163-173.

[278]
Soave, G. 1972.“Equilibrium Constants from a Modified Redlich–Kwong Equation of State”, Chem.Eng. Sci., 27, pp. 1197-1203.

[279]
Steinhoff, J., Lynn, N. and Wang, L. 2005.“Computation of High Reynolds Number Flows Using Vorticity Confinement: I. Formulation”, UTSI Preprint.

[280]
Tezduyar, T. E. and Osawa, Y. 2000." Finite element stabilization parameters computed from element matrices and vectors" , Comput.Methods in Appl.Mech.Eng., 190, pp. 411-430.

[281]
Turkel, E. 1987.“Preconditioned methods for solving the incompressible and low speed compressible equations”, Journal of Computational Physics, 72, pp. 277-298.

[282]
Vergnaud, A., Oger, G., Le Touze, D., DeLeffe, M., and Chiron, L. 2022.“Accurate, robust and efficient surface tension and contact angle models for single-phase flows using SPH”, J. Computer Meth. in Applied Mechanics and Eng, 389.

[283]
Venkatakrishnan, V. 1993.“On the Accuracy of Limiters and Convergence to Steady State Solutions”, 31st Aerospace Sciences Meeting.

[284]
Wendland, H. 1995.“Piecewise Polynomial, Positive Definite and Compactly Supported Radial Functions of Minimal Degree”, Advances in Computational Mathematics, 4(1), pp. 389–396.

[285]
Weiss, J.M., Maruszewski, J.P., and Smith, W.A.1999.“Implicit solution of preconditioned Navier-Stokes equations using algebraic multigrid”, AIAA Journal, 37(1), pp. 29-36.

[286]
Weiss, J.M., and Smith, W.A.1995.“Preconditioning applied to variable and constant density flows”, AIAA Journal, 33(11), pp. 2050-2057.

[287]
Xue, S.-C.,Phan-Thien, N. and Tanner, R. I. 1995.“Numerical study of secondary flows of viscoelastic fluid in straight pipes by an implicit finite volume method”, J. Non-Newton Fluid, 59, pp. 191-213.

[288]
Yang, Z. et al.2000.“Recent Improvements to a Hybrid Method for Rotors in Forward Flight”, AIAA Conference Reno.