宏 API 更改 2402

在 Simcenter STAR-CCM+ 2402 中，针对 3D-CAD、运动、材料属性、热传递、辐射、欧拉多相流、电池建模、后处理和设计管理器更改了宏 API。

3D-CAD：用于保留原始面的新布尔合并选项

Simcenter STAR-CCM+ 2402 中添加了一个用于在布尔合并操作中保留原始面的选项。通过此新选项，可指定是否保留由合并体功能压印到任何输入体上的任何冗余边。在以前的发行版中，这些冗余压印边是通过合并体功能自动删除的。此项改进导致宏代码更改。

以下成员函数已添加到 UniteBodiesFeature 类，该类位于包 star.cadmodeler: void setKeepImprintedEdges(boolean mode); 中。

在 2402 版本中用创建默认合并体功能录制宏时，会向宏录制一个附加语句：uniteBodiesFeature_0.setKeepImprintedEdges(false);。

以前版本 Simcenter STAR-CCM+ 2402 
UniteBodiesFeature uniteBodiesFeature_0 = cadModel_0.getFeatureManager().createUniteBodies2();
uniteBodiesFeature_0.setImprintOption(0);
uniteBodiesFeature_0.setUseAutoMatch(true);
uniteBodiesFeature_0.setTransferFaceNames(true);
uniteBodiesFeature_0.setTransferBodyNames(false);
 
UniteBodiesFeature uniteBodiesFeature_0 = cadModel_0.getFeatureManager().createUniteBodies2();
uniteBodiesFeature_0.setKeepImprintedEdges(false);
uniteBodiesFeature_0.setImprintOption(0);
uniteBodiesFeature_0.setUseAutoMatch(true);
uniteBodiesFeature_0.setTransferFaceNames(true);
uniteBodiesFeature_0.setTransferBodyNames(false);

运动：旋转运动的更改

由于 Simcenter STAR-CCM+ 引入了新的旋转运动功能，因此旋转运动和叠加旋转运动的宏代码已更改。

设置旋转运动中的旋转速率

以前版本 Simcenter STAR-CCM+ 2402 
  RotatingMotion rotatingMotion_0 = 
    ((RotatingMotion) simulation_0.get(MotionManager.class).getObject("Rotation"));

  Units units_0 = 
    ((Units) simulation_0.getUnitsManager().getObject("radian/s"));

  rotatingMotion_0.getRotationRate().setValueAndUnits(1.0, units_0);
 
  RotatingMotion rotatingMotion_0 = 
    ((RotatingMotion) simulation_0.get(MotionManager.class).getObject("Rotation"));

  RotationRate rotationRate_0 = 
    ((RotationRate) rotatingMotion_0.getRotationSpecification());

  Units units_0 = 
    ((Units) simulation_0.getUnitsManager().getObject("radian/s"));

  rotationRate_0.getRotationRate().setValueAndUnits(1.0, units_0);

设置旋转运动中的旋转轴方向和原点

以前版本 Simcenter STAR-CCM+ 2402 
  RotatingMotion rotatingMotion_0 = 
    ((RotatingMotion) simulation_0.get(MotionManager.class).getObject("Rotation"));

  Units units_0 = 
    ((Units) simulation_0.getUnitsManager().getObject(""));

  rotatingMotion_0.getAxisDirection().setComponentsAndUnits(0.0, 1.0, 1.0, units_0);
  // Alternatively it can also be:
  // rotatingMotion_0.getAxisVector().setComponentsAndUnits(0.0, 1.0, 1.0, units_0);

  Units units_1 = 
    ((Units) simulation_0.getUnitsManager().getObject("m"));

  rotatingMotion_0.getAxisOrigin().setComponentsAndUnits(0.0, 0.0, 1.0, units_1);
  // Alternatively it can also be:
  // rotatingMotion_0.getOriginVector().setComponentsAndUnits(0.0, 0.0, 1.0, units_1);
 
  RotatingMotion rotatingMotion_0 = 
    ((RotatingMotion) simulation_0.get(MotionManager.class).getObject("Rotation"));

  MotionRotationAxis motionRotationAxis_0 = 
    rotatingMotion_0.getRotationAxis();

  Units units_0 = 
    ((Units) simulation_0.getUnitsManager().getObject(""));

  motionRotationAxis_0.getDirection().setComponentsAndUnits(0.0, 1.0, 1.0, units_0);

  Units units_1 = 
    ((Units) simulation_0.getUnitsManager().getObject("m"));

  motionRotationAxis_0.getOrigin().setComponentsAndUnits(0.0, 0.0, 1.0, units_1);

设置叠加旋转运动中的旋转轴方向和原点

以前版本 Simcenter STAR-CCM+ 2402 
  SuperposingRotatingMotion superposingRotatingMotion_0 = 
    ((SuperposingRotatingMotion) rotatingMotion_0.getSuperposingMotionManager().getObject("Superposing Rotation"));

  Units units_0 = 
    ((Units) simulation_0.getUnitsManager().getObject(""));

  superposingRotatingMotion_0.getAxisDirection().setComponentsAndUnits(0.0, 1.0, 1.0, units_0);
  // Alternatively it can also be:
  // superposingRotatingMotion_0.getAxisVector().setComponentsAndUnits(0.0, 1.0, 1.0, units_0);

  Units units_1 = 
    ((Units) simulation_0.getUnitsManager().getObject("m"));

  superposingRotatingMotion_0.getAxisOrigin().setComponentsAndUnits(0.0, 0.0, 1.0, units_1);
  // Alternatively it can also be:
  // superposingRotatingMotion_0.getOriginVector().setComponentsAndUnits(0.0, 0.0, 1.0, units_1);
 
  SuperposingRotatingMotion superposingRotatingMotion_0 = 
    ((SuperposingRotatingMotion) rotatingMotion_0.getSuperposingMotionManager().getObject("Superposing Rotation"));

  MotionRotationAxis motionRotationAxis_0 = 
    superposingRotatingMotion_0.getRotationAxis();

  Units units_0 = 
    ((Units) simulation_0.getUnitsManager().getObject(""));

  motionRotationAxis_0.getDirection().setComponentsAndUnits(0.0, 1.0, 1.0, units_0);

  Units units_1 = 
    ((Units) simulation_0.getUnitsManager().getObject("m"));

  motionRotationAxis_0.getOrigin().setComponentsAndUnits(0.0, 0.0, 1.0, units_1);

设置旋转运动中的旋转角度

以前版本 Simcenter STAR-CCM+ 2402 
  RotatingMotion rotatingMotion_0 = 
    ((RotatingMotion) simulation_0.get(MotionManager.class).getObject("Rotation"));

  RotationAngle rotationAngle_0 = 
    ((RotationAngle) rotatingMotion_0.getRotationSpecification());

  UserFieldFunction userFieldFunction_0 = 
    ((UserFieldFunction) simulation_0.getFieldFunctionManager().getFunction("AngleFieldFunction"));

  rotationAngle_0.setRotationAngleFunction(userFieldFunction_0);
 
  RotatingMotion rotatingMotion_0 = 
    ((RotatingMotion) simulation_0.get(MotionManager.class).getObject("Rotation"));

  RotationAngle rotationAngle_0 = 
    ((RotationAngle) rotatingMotion_0.getRotationSpecification());

  rotationAngle_0.getRotationAngle().setDefinition("${AngleFieldFunction}");

设置叠加旋转运动中的旋转角度

以前版本 Simcenter STAR-CCM+ 2402 
  SuperposingRotatingMotion superposingRotatingMotion_0 = 
    ((SuperposingRotatingMotion) rotatingMotion_0.getSuperposingMotionManager().getObject("Superposing Rotation"));

  RotationAngle rotationAngle_0 = 
    ((RotationAngle) superposingRotatingMotion_0.getRotationSpecification());

  UserFieldFunction userFieldFunction_0 = 
    ((UserFieldFunction) simulation_0.getFieldFunctionManager().getFunction("AngleFieldFunction"));

  rotationAngle_0.setRotationAngleFunction(userFieldFunction_0);
 
  SuperposingRotatingMotion superposingRotatingMotion_0 = 
    ((SuperposingRotatingMotion) rotatingMotion_0.getSuperposingMotionManager().getObject("Superposing Rotation"));

  RotationAngle rotationAngle_0 = 
    ((RotationAngle) superposingRotatingMotion_0.getRotationSpecification());

  rotationAngle_0.getRotationAngle().setDefinition("${AngleFieldFunction}");

材料属性：弃用各向异性材料属性指定方法

材料属性指定方法各向异性和各向异性（原有）从 2210 版本开始已弃用，并计划从以后的版本中移除。有关这些方法和计划替换的详细信息，请参见 2402 发行说明“重要说明”章节中的“材料属性”。

如果任何现有宏使用已弃用的材料属性法（导热率、导电率、渗透率、介电常数的 9 个各向异性分量，或是导热率的各向异性（原有）），则搜索以下字符串的实例并更新它们，如下表中所示。

以前版本 Simcenter STAR-CCM+ 2402
AnisotropicElectricalConductivityMethodWithValues FullTensorElectricalConductivityMethodWithValues
AnisotropicPermeabilityMethodWithValues FullTensorPermeabilityMethodWithValues
AnisotropicPermittivityMethodWithValues FullTensorPermittivityMethodWithValues
AnisotropicThermalConductivityMethodWithValues FullTensorThermalConductivityMethodWithValues
AnisotropicThermalConductivityMethod FullTensorLegacyThermalConductivityMethod

辐射：光子蒙特卡洛建模的更改

由于引入了体积光子蒙特卡洛建模，光子蒙特卡洛求解器的宏代码已更改。

以前版本 Simcenter STAR-CCM+ 2402 
PMCSolver pMCSolver_0 = ((PMCSolver) simulation.getSolverManager().getSolver(PMCSolver.class));
S2sPMCRtPhysicsSolver s2sPMCRtPhysicsSolver_0 =
    ((S2sPMCRtPhysicsSolver) pMCSolver_0.getSolvers().getSolver(S2sPMCRtPhysicsSolver.class));
s2sPMCRtPhysicsSolver_0.setNumRaysPerPatch(400);
 
PMCSolver pMCSolver_0 = ((PMCSolver) simulation.getSolverManager().getSolver(PMCSolver.class));
PMCRtPhysicsSolver pMCRtPhysicsSolver_0 =
    ((PMCRtPhysicsSolver) pMCSolver_0.getSolvers().getSolver(PMCRtPhysicsSolver.class));
pMCRtPhysicsSolver_0.setNumRaysPerPatch(400);

欧拉多相流 (EMP)：颗粒引发湍流的更改

在 2402 版本中，欧拉多相混合物湍流现在与颗粒引发湍流兼容，导致宏代码发生更改。

以前版本 Simcenter STAR-CCM+ 2402 
phaseInteraction_0.enable(ParticleInducedTurbulenceGroup.class);

phaseInteraction_0.enable(TchenPitModel.class);

phaseInteraction_0.enable(VirtualMassCoefficientModel.class);

TchenPitModel tchenPitModel_0 = 
  phaseInteraction_0.getModelManager().getModel(TchenPitModel.class);

Units units_0 = 
  ((Units) simulation_0.getUnitsManager().getObject(""));

tchenPitModel_0.getTchenCDamp().setValueAndUnits(1.0, units_0);

tchenPitModel_0.getTchenC3().setValueAndUnits(1.44, units_0);

tchenPitModel_0.getTchenPrandtlNumber().setValueAndUnits(1.0, units_0);

tchenPitModel_0.getC_beta().setValueAndUnits(1.8, units_0);
 
phaseInteraction_0.enable(ParticleInducedTurbulenceSourceModel.class);

ParticleInducedTurbulenceSourceModel particleInducedTurbulenceSourceModel_0 = 
  phaseInteraction_0.getModelManager().getModel(ParticleInducedTurbulenceSourceModel.class);

particleInducedTurbulenceSourceModel_0.getPitSourceOption().setSelected(PitSourceOption.Type.TCHEN);

Units units_0 = 
  ((Units) simulation_0.getUnitsManager().getObject(""));

particleInducedTurbulenceSourceModel_0.getTchenC3().setValueAndUnits(1.44, units_0);

particleInducedTurbulenceSourceModel_0.getTchenCDamp().setValueAndUnits(1.0, units_0);

particleInducedTurbulenceSourceModel_0.getC_beta().setValueAndUnits(1.8, units_0);

particleInducedTurbulenceSourceModel_0.getTchenPrandtl().setValueAndUnits(1.0, units_0);
 
phaseInteraction_0.enable(ParticleInducedTurbulenceGroup.class);

phaseInteraction_0.enable(TroshkoHassanPITModel.class);
	
	phaseInteraction_0.enable(VirtualMassCoefficientModel.class);
	
Units units_0 = 
  ((Units) simulation_0.getUnitsManager().getObject(""));

TroshkoHassanPITModel troshkoHassanPITModel_0 = 
  phaseInteraction_0.getModelManager().getModel(TroshkoHassanPITModel.class);

troshkoHassanPITModel_0.getTroshkoHassanC3().setValueAndUnits(0.45, units_0);

troshkoHassanPITModel_0.getTroshkoHassanCDamp().setValueAndUnits(1.0, units_0);
 
phaseInteraction_0.enable(ParticleInducedTurbulenceSourceModel.class);

ParticleInducedTurbulenceSourceModel particleInducedTurbulenceSourceModel_0 = 
  phaseInteraction_0.getModelManager().getModel(ParticleInducedTurbulenceSourceModel.class);

particleInducedTurbulenceSourceModel_0.getPitSourceOption().setSelected(PitSourceOption.Type.TROSHKO_HASSAN);

Units units_0 = 
  ((Units) simulation_0.getUnitsManager().getObject(""));
   
particleInducedTurbulenceSourceModel_0.getTroshkoHassanC3().setValueAndUnits(0.45, units_0);

particleInducedTurbulenceSourceModel_0.getTroshkoHassanCDamp().setValueAndUnits(1.0, units_0);
 
phaseInteraction_0.enable(ParticleInducedMixingModel.class);

ParticleInducedMixingModel particleInducedMixingModel_0 = 
  phaseInteraction_0.getModelManager().getModel(ParticleInducedMixingModel.class);

SatoBubbleInducedViscosityMethod satoBubbleInducedViscosityMethod_0 = 
  particleInducedMixingModel_0.getParticleInducedViscosity().getMethod(SatoBubbleInducedViscosityMethod.class);

satoBubbleInducedViscosityMethod_0.setAPlusConstant(26.0);

satoBubbleInducedViscosityMethod_0.setCalibrationConstant(1.2);
 
   phaseInteraction_0.enable(ParticleInducedTurbulenceViscosityModel.class);

ParticleInducedTurbulenceViscosityModel particleInducedTurbulenceViscosityModel_0 = 
  phaseInteraction_0.getModelManager().getModel(ParticleInducedTurbulenceViscosityModel.class);

SatoBubbleInducedViscosityMethod satoBubbleInducedViscosityMethod_0 = 
  particleInducedTurbulenceViscosityModel_0.getParticleInducedViscosity().getMethod(SatoBubbleInducedViscosityMethod.class);

satoBubbleInducedViscosityMethod_0.setAPlusConstant(26.0);

satoBubbleInducedViscosityMethod_0.setCalibrationConstant(1.2);
 
phaseInteraction_0.enable(ParticleInducedTurbulenceGroup.class);

phaseInteraction_0.enable(VirtualMassCoefficientModel.class);
	
phaseInteraction_0.enable(TurbulentDispersionForceModel.class);

phaseInteraction_0.enable(GosmanPITModel.class);
 
phaseInteraction_0.enable(ParticleInducedTurbulenceSourceModel.class);

ParticleInducedTurbulenceSourceModel particleInducedTurbulenceSourceModel_0 = 
  phaseInteraction_0.getModelManager().getModel(ParticleInducedTurbulenceSourceModel.class);
 
 particleInducedTurbulenceSourceModel_0.getPitSourceOption().setSelected(PitSourceOption.Type.GOSMAN);

电池建模：热失控的更改

由于在热失控建模中引入了 Q 表，相关宏代码已更改。

以前版本 Simcenter STAR-CCM+ 2402 
ThermalRunawayHeatReleaseModelDescription thermalRunawayHeatReleaseModelDescription_0 = 
      ((ThermalRunawayHeatReleaseModelDescription) userDefinedBatteryCell_0.getModelDescription(ModelType.TRHEAT));

thermalRunawayHeatReleaseModelDescription_0.setTable(fileTable_0);
thermalRunawayHeatReleaseModelDescription_0.setTemperature("Temperature");
thermalRunawayHeatReleaseModelDescription_0.setHeatRate("Heatrate");
thermalRunawayHeatReleaseModelDescription_0.setExtrapolateTable(true);
thermalRunawayHeatReleaseModelDescription_0.getInterpolationTypeOption().setSelected(InterpolationTypeOption.Type.BEZIER);

thermalRunawayHeatReleaseModelDescription_0.plotHeatRateTable();
 
ThermalRunawayHeatReleaseModelDescription thermalRunawayHeatReleaseModelDescription_0 = 
      ((ThermalRunawayHeatReleaseModelDescription) userDefinedBatteryCell_0.getModelDescription(ModelType.TRHEAT));

HeatRateByTemperatureTableMethod heatRateByTemperatureTableMethod_0 = 
      ((HeatRateByTemperatureTableMethod) thermalRunawayHeatReleaseModelDescription_0.getHeatRateMethods().getActiveMethod());

heatRateByTemperatureTableMethod_0.setTable(fileTable_0);
heatRateByTemperatureTableMethod_0.setTemperature("Temperature");
heatRateByTemperatureTableMethod_0.setHeatRate("Heatrate");
heatRateByTemperatureTableMethod_0.setExtrapolateTable(true);
heatRateByTemperatureTableMethod_0.getInterpolationTypeOption().setSelected(InterpolationTypeOption.Type.BEZIER);

thermalRunawayHeatReleaseModelDescription_0.getHeatRateMethods().plotHeatRateTable();

后处理：计划从 Java Framework 中移除 ChartStyle 类 (2406)

ChartStyle 类当前计划在版本 2406 中从绘图框架中移除，以进一步更改为准。

以下类结构不再受支持，它们可能存在于导入 .plt 文件的较旧 Java 宏中：

  • star.common.graph.ChartStyle
  • star.common.graph.ChartStyleManager

该类的早期使用示例在 exampleXYPlot 上显示数据集，其 ChartStyle 正在更新：

DataSet dataSet = exampleXYPlot.getYAxes().getAxisType("Y Type 1").getDataSets().getDataSet("Temperature");
dataSet.getChartStyle().setSymbolShape(JCSymbolStyle.NONE);
dataSet.getChartStyle().setLinePattern(JCLineStyle.SOLID);
dataSet.getChartStyle().setLineColor(Color.red);
dataSet.getChartStyle().setLineWidth(4);

近年来，Style 已在其自己的子对象中进行管理，ChartStyle 已变得不必要。

对于版本 2402，需要进行两项更改：

  • 如果适用，直接更新 Style，而不是通过 ChartStyle 路由请求。
  • 如果无法直接更改，则完全移除调用。

特定 Style-to-Type 替换：

  • 将 JCSymbolStyle 替换为 SymbolShapeOption.Type。
  • 将 JCLineStyle 替换为 LinePatternOption.Type。
  • 将 JCFillStyle 替换为 FillPatternOption.Type。

更新代码的详细说明，含示例

应根据需要更新以下与线样式相关的调用：

  • ChartStyle.setLinePattern
  • ChartStyle.setLineColor
  • ChartStyle.setLineWidth

对线样式 API 调用的更新的示例：

// At the top of the macro
import star.common.LinePatternOption;
import star.common.LineStyle;
 
DataSet dataSet = exampleXYPlot.getYAxes().getAxisType("Y Type 1").getDataSets().getDataSet("Temperature");
 
// Step 1: Replace getChartStyle() calls with their direct 'set' calls.
// dataSet.getChartStyle().setLinePattern(JCLineStyle.SOLID);
dataSet.getLineStyle().setLinePatternOptionInput(LinePatternOption.Type.SOLID);          // (Step 2) replacement for JCLineStyle.SOLID
 
// dataSet.getChartStyle().setLineColor(Color.red);
dataSet.getLineStyle().setColor(Color.red);
 
// dataSet.getChartStyle().setLineWidth(4);
dataSet.getLineStyle().setLineWidth(4);

应根据需要更新以下与标记样式相关的调用：

  • ChartStyle.setSymbolShape
  • ChartStyle.setSymbolSize
  • ChartStyle.setSymbolStrokeWidth
  • ChartStyle.setSymbolColor

对标记样式 API 调用的更新的示例：

// At the top of the macro
import star.common.SymbolShapeOption;
import star.common.SymbolStyle;
 
DataSet dataSet = exampleXYPlot.getYAxes().getAxisType("Y Type 1").getDataSets().getDataSet("Temperature");
 
// Step 1: Replace getChartStyle() calls with their direct 'set' calls. Calls
// dataSet.getChartStyle().setSymbolShape(JCSymbolStyle.NONE);
dataSet.getSymbolStyle().setSymbolShapeOptionInput(SymbolShapeOption.Type.NONE);            // (Step 2) replacement for JCSymbolStyle.NONE
 
// dataSet.getChartStyle().setSymbolSize(10);
dataSet.getSymbolStyle().setSize(10);
 
// dataSet.getChartStyle().setSymbolStrokeWidth(0.2);
dataSet.getSymbolStyle().setStrokeWidth(0.2);
 
// dataSet.getChartStyle().setSymbolColor(Color.red);
dataSet.getSymbolStyle().setColor(Color.red);

应根据需要更新以下与填充风格相关的调用：

  • ChartStyle.setFillPattern
  • ChartStyle.setFillColor
  • ChartStyle.setFillBackground

对填充风格 API 调用的更新的示例：

// At the top of the macro
import star.common.FillPatternOption;
import star.common.FillStyle;
 
DataSet dataSet = exampleXYPlot.getYAxes().getAxisType("Y Type 1").getDataSets().getDataSet("Temperature");
 
// Step 1: Replace getChartStyle() calls with their direct 'set' calls.
// dataSet.getChartStyle().setFillPattern(JCFillStyle.SOLID);
dataSet.getFillStyle().setLinePatternOptionInput(FillPatternOption.Type.SOLID);             // (Step 2) replacement for JCFillStyle.SOLID
 
// dataSet.getChartStyle().setFillColor(Color.red);
dataSet.getFillStyle().setColor(Color.red);
 
// dataSet.getChartStyle().setFillBackground(Color.blue);
dataSet.getFillStyle().setBackgroundColor(Color.blue);

应完全移除以下 API 调用。他们的处理已中止/内部化。

  • ChartStyle.setLineCap
  • ChartStyle.setLineJoin

对线样式 API 调用的移除的示例：

DataSet dataSet = exampleXYPlot.getYAxes().getAxisType("Y Type 1").getDataSets().getDataSet("Temperature");
dataSet.getChartStyle().setLineCap(0);
dataSet.getChartStyle().setLineJoin(0);

旧标记、线样式和填充风格已替换为当前支持的类型

标记样式：import star.common.SymbolShapeOption；

以前版本 Simcenter STAR-CCM+ 2402 
JCSymbolStyle.NONE
 
SymbolShapeOption.Type.NONE
 
JCSymbolStyle.DOT
 
SymbolShapeOption.Type.FILLED_CIRCLE
 
JCSymbolStyle.BOX
 
SymbolShapeOption.Type.FILLED_SQUARE
 
JCSymbolStyle.TRIANGLE
 
SymbolShapeOption.Type.FILLED_TRIANGLE
 
JCSymbolStyle.DIAMOND
 
SymbolShapeOption.Type.FILLED_DIAMOND
 
JCSymbolStyle.STAR
 
SymbolShapeOption.Type.STAR 
JCSymbolStyle.VERT_LINE
 
SymbolShapeOption.Type.VERTICAL_LINE
 
JCSymbolStyle.HORIZ_LINE
 
SymbolShapeOption.Type.HORIZONTAL_LINE
 
JCSymbolStyle.CROSS
 
SymbolShapeOption.Type.CROSS
 
JCSymbolStyle.CIRCLE
 
SymbolShapeOption.Type.EMPTY_CIRCLE
 
JCSymbolStyle.SQUARE
 
SymbolShapeOption.Type.EMPTY_SQUARE

线样式：import star.common.LinePatternOption；

以前版本 Simcenter STAR-CCM+ 2402 
JCLineStyle.NONE
 
LinePatternOption.Type.NONE
 
JCLineStyle.SOLID
 
LinePatternOption.Type.SOLID
 
JCLineStyle.LONG_DASH
 
LinePatternOption.Type.DASH
 
JCLineStyle.SHORT_DASH
 
LinePatternOption.Type.DOT
 
JCLineStyle.LSL_DASH
 
LinePatternOption.Type.DASH_DOT
 
JCLineStyle.DASH_DOT
 
LinePatternOption.Type.DASH_DOT

填充风格：import star.common.FillPatternOption；

以前版本 Simcenter STAR-CCM+ 2402 
JCFillStyle.NONE
 
FillPatternOption.Type.NONE
 
JCFillStyle.SOLID
 
FillPatternOption.Type.SOLID
 
JCFillStyle.PER_25
 
FillPatternOption.Type.DOT_25_PERCENT
 
JCFillStyle.PER_50
 
FillPatternOption.Type.DOT_50_PERCENT
 
JCFillStyle.PER_75
 
FillPatternOption.Type.DOT_75_PERCENT
 
JCFillStyle.HORIZ_STRIPE
 
FillPatternOption.Type.HORIZONTAL_STRIPE
 
JCFillStyle.VERT_STRIPE
 
FillPatternOption.Type.VERTICAL_STRIPE
 
JCFillStyle.STRIPE_45
 
FillPatternOption.Type.DEGREE_45_STRIPE
 
JCFillStyle.STRIPE_135
 
FillPatternOption.Type.DEGREE_135_STRIPE
 
JCFillStyle.DIAG_HATCHED
 
FillPatternOption.Type.DIAGONAL_HATCH
 
JCFillStyle.CROSS_HATCHED
 
FillPatternOption.Type.CROSS_HATCH
 
JCFillStyle.CUSTOM_FILL
 
FillPatternOption.Type.SOLID
 
JCFillStyle.CUSTOM_STACK
 
FillPatternOption.Type.SOLID

样式 API 移除和替换

线样式

移除以下内容：

  • LineStyle.setVisible(boolean)
  • LineStyle.getJoin()
  • LineStyle.setJoin(int)
  • LineStyle.getCap()
  • LineStyle.setCap(int)

如下替换代码：

以前版本 Simcenter STAR-CCM+ 2402 
LineStyle.getStyle()
 
LinePatternOption.Type LineStyle.getLinePatternOption().getSelectedElement()
 
LineStyle.setStyle(int)
 
LineStyle.getLinePatternOption().setSelected(LinePatternOption.Type)

标记样式

Remove SymbolStyle.setVisible(boolean)。

如下替换代码：

以前版本 Simcenter STAR-CCM+ 2402 
SymbolStyle.getStyle()
 
SymbolShapeOption.Type SymbolStyle.getSymbolShapeOption().getSelectedElement()
 
SymbolStyle.setStyle(int)
 
SymbolStyle.getSymbolShapeOption().setSelected(SymbolShapeOption.Type)

填充风格

Remove FillStyle.setVisible(boolean)。

以前版本 Simcenter STAR-CCM+ 2402 
FillStyle.getPattern()
 
FillPatternOption.Type FillStyle.getFillPatternOption().getSelectedElement()
 
FillStyle.setPattern(int)
 
FillStyle.getFillPatternOption().setSelected(FillPatternOption.Type)

设计管理器：输出表和默认视图的更改

在设计管理器中，输出表已重构，现在运行研究时仪表板是默认视图。这些修改导致宏代码发生更改。

输出表有一个新类，并且 openTableView 类现已弃用。

以前版本 Simcenter STAR-CCM+ 2402 
MdxAllDesignSet mdxAllDesignSet_0 = 
  ((MdxAllDesignSet) mdxDesignStudy_0.getDesignSets().getDesignSet("All"));

mdxAllDesignSet_0.openTableView();
 
MdxAllDesignSet mdxAllDesignSet_0 = 
  ((MdxAllDesignSet) mdxDesignStudy_0.getDesignSets().getDesignSet("All"));

MdxDesignSetTable mdxDesignSetTable_0 = 
  mdxAllDesignSet_0.getDesignSetTable();

mdxDesignSetTable_0.openInteractive();

2402 版本中引入了设计管理器仪表板。运行研究时，将显示仪表板而不是输出表。仪表板也可以手动打开。

您可能想要打开仪表板而不是输出表。以下代码将打开仪表板：

MdxDesignStudy mdxDesignStudy_0 = 
  mdxProject_0.getDesignStudyManager().getDesignStudy("Test");

LayoutView layoutView_0 = 
  mdxDesignStudy_0.openStudyDashboard();

下表显示在先前发行版和 2402 版本中运行设计研究过程中录制的宏代码。

以前版本 Simcenter STAR-CCM+ 2402 
MdxProject mdxProject_0 = 
  getActiveMdxProject();

MdxDesignStudy mdxDesignStudy_0 = 
  mdxProject_0.getDesignStudyManager().getDesignStudy("Design Study");

MdxAllDesignSet mdxAllDesignSet_0 = 
  ((MdxAllDesignSet) mdxDesignStudy_0.getDesignSets().getDesignSet("All"));

mdxAllDesignSet_0.openTableView();

mdxAllDesignSet_0.openTableView();

mdxDesignStudy_0.runDesignStudy();

MdxDesign mdxDesign_0 = 
  mdxDesignStudy_0.getDesigns().getDesign("Design 1");

mdxDesignStudy_0.getDesigns().setCurrentDesign(mdxDesign_0);
 
MdxProject mdxProject_0 = 
  getActiveMdxProject();

MdxDesignStudy mdxDesignStudy_0 = 
  mdxProject_0.getDesignStudyManager().getDesignStudy("Test");

mdxDesignStudy_0.runDesignStudy();

LayoutView layoutView_0 = 
  mdxDesignStudy_0.openStudyDashboard();

layoutView_0.openInteractive();

MdxDesignSceneView mdxDesignSceneView_0 = 
  ((MdxDesignSceneView) mdxProject_0.get(MdxDesignViewManager.class).getDesignView("Test - Snapshot"));

mdxDesignSceneView_0.initializeAndWait();