湍流参考书目

Spalart-Allmaras 湍流

[289]

Baldwin, B.S. and Lomax, H. 1978.“Thin-Layer Approximation and Algebraic Model for Separated Turbulent Flows”, AIAA-78-0257.

[290]

Dacles-Mariani, J., Zilliac, G., Chow, J.S., and Bradshaw, P. 1995.“Numerical/experimental study of a wingtip vortex in the near field”, AIAA Journal, 33(9), pp. 1561-1568.

[291]

Johnson, D.A. and King, L.S.1985.“A Mathematically Simple Turbulence Closure Model for Attached and Separated Turbulent Boundary Layers”, AIAA Journal, 23(11), pp. 1684-1692

[292]

NASA Langley Research Center, Turbulence Modeling Resource, https://turbmodels.larc.nasa.gov/

[293]

Shur, M. L., Strelets, M. K., Travin, A. K., and Spalart, P. R. 2000.“Turbulence Modeling in Rotating and Curved Channels: Assessing the Spalart-Shur Correction”, AIAA Journal, 38(5), pp. 784-792.

[294]

Spalart, P.R.2000.“Strategies for turbulence modelling and simulations”, International Journal of Heat and Fluid Flow, 21, pp. 252-263.

[295]

Spalart, P.R., and Allmaras, S.R.1992.“A one-equation turbulence model for aerodynamic flows”, AIAA-92-0439.

[296]

Wilcox, D.C. 1998.“Turbulence Modeling for CFD”.2nd edition, DCW Industries, Inc.

K-Epsilon Turbulence

[297]

Durbin, P.A.1991.“Near-wall turbulence closure modeling without damping functions”, Theoretical and Computational Fluid Dynamics, 3, pp. 1-13.

[298]

Henkes, R.A.W.M., van der Flugt, F.F., and Hoogendoorn, C.J.1991.“Natural convection in a square cavity calculated with low-Reynolds number turbulence models”, Int. J. Heat Mass Transfer, 34, pp. 1543-1557.

[299]

Jones, W.P., and Launder, B.E.1972.“The Prediction of Laminarization with a Two-Equation Model of Turbulence”, Int. J. Heat and Mass Transfer, 15, pp. 301-314.

[300]

Jongen, T. 1998.“Simulation and Modeling of Turbulent Incompressible Flows”, Ph.D.Thesis, Lausanne EPFL.

[301]

Kenjeres, S., Gunarjo, S.B.,

[302]

Launder, B.E., and Sharma, B.I.1974.“Application of the Energy Dissipation Model of Turbulence to the Calculation of Flow Near a Spinning Disc”, Letter in Heat and Mass Transfer, vol. 1, no. 2, pp 131-138.

[303]

Larsen, B.E., and Fuhrman, D.R.2018."On the over-production of turbulence beneath surface waves in Reynolds-averaged Navier-Stokes models", J. Fluid Mech., 853, pp. 419-460.

[304]

Lien, F.S., Chen, W.L., and Leschziner, M.A. 1996.“Low-Reynolds number eddy-viscosity modelling based on non-linear stress-strain/vorticity relations”, Proc.3rd Symp. on Engineering Turbulence Modelling and Measurements, 27-29 May, Crete, Greece.

[305]

Norris, L.H., and Reynolds, W.C.1975.“Turbulent channel flow with a moving wavy boundary”, Report No. FM–10, Department of Mechanical Engineering, Stanford University, USA.

[306]

Rodi, W. 1991.“Experience with Two-Layer Models Combining the k-e Model with a One-Equation Model Near the Wall”, 29th Aerospace Sciences Meeting, January 7-10, Reno, NV, AIAA 91-0216.

[307]

Sarkar, S., and Balakrishnan, L. 1990.“Application of a Reynolds-stress turbulence model to the compressible shear layer”, ICASE Report 90-18, NASA CR 182002.

[308]

Shih, T.-H., Liou, W.W., Shabbir, A., Yang, Z. and Zhu, J. 1994.“A New k- Eddy Viscosity Model for High Reynolds Number Turbulent Flows -- Model Development and Validation”, NASA TM 106721. $\epsilon$

[309]

Spalart, P.R. and Rumsey, C.L.2007.“Effective Inflow Conditions for Turbulence Models in Aerodynamic Calculations”, AIAA Journal, 45(10), pp. 2544-2553.

[310]

Wolfstein, M. 1969.“The velocity and temperature distribution in one-dimensional flow with turbulence augmentation and pressure gradient”, Int. J. Heat Mass Transfer, 12, pp. 301-318.

[311]

Xu, W., Chen, Q., and Nieuwstadt, F.T.M.1998.“A new turbulence model for near-wall natural convection”, Int. J. Heat Mass Transfer, 41, pp. 3161-3176.

[312]

Yap, C. 1987.“Turbulent heat and momentum transfer in recirculating and impinging flows”, Ph.D.Thesis, Faculty of Technology, University of Manchester, U.K.

K-Omega Turbulence

[313]

Arolla, S. K., and Durbin, P. A. 2012.“Modeling rotation and curvature effects within scalar eddy viscosity model framework”, publication pending.

[314]

Durbin, P.A.1996.“On the k-e stagnation point anomaly”, Int. J. Heat and Fluid Flow 17, pp. 89-90.

[315]

Hellsten, A. 2005."New Advanced k-omega Turbulence Model for High-Lift Aerodynamics", AIAA Journal, Vol.43, No. 9, pp. 1857-1869.

[316]

Menter, F.R.1994.“Two-equation eddy-viscosity turbulence modeling for engineering applications”, AIAA Journal, 32(8), pp. 1598-1605.

[317]

Sarkar, S., Erlebacher, G., Hussaini, M. Y., and Kreiss, H. O., "The analysis and modelling of dilatational terms in compressible turbulence", Journal of Fluid Mechanics , Vol.227, pp. 473-493.

[318]

Spalart, P.R.2000."Strategies for turbulence modelling and simulations", Int. J. of Heat and Fluid Flow, Vol.21(3), pp. 252-263.

[319]

Spalart, P.R. and Rumsey, C.L.2007.“Effective Inflow Conditions for Turbulence Models in Aerodynamic Calculations”, AIAA Journal, 45(10), pp. 2544-2553.

[320]

Wallin, S. and Johansson, A. V. 2000."An Explicit Algebraic Reynolds Stress Model for Incompressible and Compressible Turbulent Flows," J. Fluid Mechanics, Vol. 403, pp. 89-132.

[321]

Wilcox, D.C. 1998.“Turbulence Modeling for CFD”, 2nd edition, DCW Industries, Inc.

[322]

Wilcox, D.C. 2008.“Formulation of the k- turbulence model revisited”, AIAA Journal, 46(11), pp. 2823-2838. $\omega$

Elliptic Blending Turbulence

[323]

Billard, F. and Laurence, D. 2012.“A robust elliptic blending turbulence model applied to near-wall, separated and buoyant flows”, International Journal of Heat and Fluid Flow 33 (1), pp. 45–58. $k-\epsilon \text{-}{v}^2/k$

[324]

Durbin, P.A.1993.“A Reynolds stress model for near-wall turbulence”, Journal of Fluid Mechanics 249 (1), pp 465–498.

[325]

Durbin, P. A., Medic, G., Seo, J. M., Eaton, J. K., and Song, S. 2001."Rough Wall Modification of 2-layer k-epsilon" , ASME Journal of Fluids Engineering, 123, pp. 16-21.

[326]

Knopp, T., Eisfeld, B., and Calvo, J. B., 2009."A new extension for k-omega turbulence models to account for wall roughness", International Journal of Heat and Fluid Flow, 30, pp. 54-65.

[327]

Manceau, R. and Hanjalić, K. 2002.“Elliptic blending model: A new near-wall Reynolds-stress turbulence closure” Physics of Fluids 14, pp 744.

Lag Elliptic Blending Turbulence

[328]

Lardeau, S., Billard, F. 2016."Development of an elliptic-blending lag model for industrial applications", 54th AIAA Aerospace Sciences Meeting, p.1600.

[329]

Revell, A.J., Benhamadouche, S., Craft, T., Laurence, D. 2006." A stress-strain lag eddy viscosity model for unsteady mean flow."International Journal of Heat and Fluid Flow 27 (5), pp. 821-830.

Scale-Resolving Hybrid Turbulence

[330]

Duffal, V., de Laage de Meux, B., and Manceau, R. 2019 "Development and validation of a hybrid RANS-LES approach based on temporal filtering", Proc. of the 8th Joint Fluids Engineering Conference, San Francisco, USA.

Reynolds Stress Transport Turbulence

[331]

Daly, B.J. and Harlow, F.H.1970.“Transport equations of turbulence”, Physics of Fluids 13, pp. 2634-2649.

[332]

Gibson, M.M. and Launder, B.E.1978.“Ground effects on pressure fluctuations in the atmospheric boundary layer”, J. Fluid Mech., 86(3), pp. 491-511.

[333]

Hadzic, I. 1999.“Second-moment closure modeling of transitional and unsteady turbulent flows”, doctoral thesis, Technical University of Delft.

[334]

Lardeau, S. and Manceau, R. 2014.“Computations of Complex Flow Configurations Using a Modified Elliptic-Blending Reynolds-Stress Model”, Proc. of the 10th Eng. Turb.Modelling and Measurement Conf., Marbella, Spain.

[335]

Launder, B.E. and Shima, N. 1989.“Second Moment Closure for the Near-Wall Sublayer: Development and Application”, AIAA J. 27(10), October, pp. 1319-1325.

[336]

Lien, F.S. and Leschziner, M.A. 1994.“Assessment of turbulence-transport models including non-linear RNG eddy-viscosity formulation and second-moment closure for flow over a backward-facing step”, Computers Fluids, 23(8), pp. 983-1004.

[337]

Sarkar, S., and Balakrishnan, L. 1990.“Application of a Reynolds-stress turbulence model to the compressible shear layer”, ICASE Report 90-18, NASA CR 182002.

[338]

Speziale, C.G., Sarkar, S., and Gatski, T.B.1991.“Modelling the pressure-strain correlation of turbulence: an invariant dynamical systems approach”, J. Fluid Mech., 227, pp. 245-272.

RANS Turbulent Heat Transfer

[339]

Kenjeres, S., Gunarjo, S.B., and Hanjalic, K. 2005.“Contribution to elliptic relaxation modelling of turbulent natural and mixed convection”, International Journal of Heat and Fluid Flow, 26(4), pp. 569–586.

Atmospheric Boundary Layers

[340]

Garratt, J.R.1992.“The atmospheric boundary layer”, Cambridge University Press, pp. 1–15.

[341]

Martinez, B. 2011.“Wind resource in complex terrain with OpenFOAM”, MSc Thesis, Riso DTU, Denmark.

[342]

Richards, P. J., and Hoxey, R. P. 1993.“Appropriate boundary conditions for computational wind engineering models using the k-epsilon model”, Journal of Wind Engineering and Industrial Aerodynamics, 46, pp. 145–153.

Large Eddy Simulation

[343]

Addad, Y., Gaitonde, U., Laurence, D., and Rolfo, S. 2008." Optimal Unstructured Meshing for Large Eddy Simulations" , Quality and Reliability of Large-Eddy Simulations (12), pp. 93-103, Springer.

[344]

Balaras, E., Benocci, C., and Piomelli, U. 1996.“Two-Layer Approximate Boundary Conditions for Large-Eddy Simulations,” AIAA Journal 34(6), pp. 1111-1119.

[345]

Germano, M., Piomelli, U., Moin, P., and Cabot, W. H. 1991.“A Dynamic Subgrid-Scale Eddy Viscosity Model”, Physics of Fluids A, 3(7), pp. 1760-1765.

[346]

Lilly, D. K. 1992.“A proposed modification of the Germano subgrid-scale closure method”, Physics of Fluids A 4(3), pp. 633-635.

[347]

Nicoud, F. and Ducros, F., 1999.“Subgrid-Scale Stress Modelling Based on the Square of the Velocity Gradient Tensor,” Flow, Turbulence and Combustion, 62, pp. 183-200.

[348]

Smagorinsky, J. 1963.“General Circulation Experiments with the Primitive Equations: Part I, The Basic Experiment,” Monthly Weather Review, 91, pp. 99-164.

[349]

Tucker, P. G. 2016."Advanced Computational Fluid Dynamics", Cambridge University Press

[350]

Van Driest, E. R. 1956.“On Turbulent Flow Near a Wall,” J. Aero.Sci., pp. 1007-1011.

[351]

Vreman, B., Geurts, B., and Kuerten, H. 1994.“Realizability conditions for the turbulent stress tensor in Large Eddy Simulation,” J. Fluid Mech., 278, pp. 351–362.

Detached Eddy Simulation

[352]

Constantinescu, G.S., Pacheco, R., and Squires, K.D.2002."Detached-eddy simulation of flow over a sphere", AIAA Aerospace Sciences Meeting 2002, Reno, Nevada, USA, Paper AIAA 2002-0425.

[353]

Menter, F. R. and Kuntz, M. 2002.“Adaptation of Eddy Viscosity Turbulence Models to Unsteady Separated Flows Behind Vehicles”, in The Aerodynamics of Heavy Vehicles: Trucks, Buses and Trains, Springer, Asilomar, CA.

[354]

Shur, M.L., Spalart, P.R., Strelets, M.Kh., and Travin, A.K.2008.“A hybrid RANS-LES approach with delayed-DES and wall-modelled LES capabilities”, International Journal of Heat and Fluid Flow, 29(6), pp. 1638-1649.

[355]

Spalart, P.R., Jou., W.H., Strelets, M. and Allmaras, S.R.1997.“Comments on the feasibility of LES for wings, and on a hybrid RANS/LES approach”, 1st AFOSR Int. Conf. on DNS/LES Aug, 4-8 1997.In: Advances in DNS/LES, C. Liu and Z. Liu Eds., Greyden Press, Columbus, OH.

[356]

Spalart, P.R., Deck, S., Shur, M.L., Squires, K.D., Strelets.M. and Travin, A. 2006.“A new version of detached eddy simulation, resistant to ambiguous grid densities”, Theor.Comput.Fluid Dynamics, 20, pp. 181-195.

[357]

Squires, K. D., Forsythe, J. R., Strang, W. Z., Wurtsler, K. E., Tomaro, R.F., Grismer, M. J. and Spalart, P.R.2002.“Progress on detached-eddy simulation of massively separated flows”, AIAA 2002-1021.

[358]

Travin, A., Shur, M. L., Strelets, M. Kh., and Spalart, P. R. 2002.“Physical and numerical upgrades in the Detached-Eddy Simulation of complex turbulent flows”, in Advances in LES of Complex Flows, R. Friedrich and W. Rodi Eds., Kluwer Academic Press, pp. 239-254.

SEM

[359]

Benamadouche, S., Jarrin, N., Addad, Y., and Laurence, D. 2006.“Synthetic turbulent inflow conditions based on a vortex-method for large eddy simulation”, Progress in Computational Fluid Dynamics, 6, pp. 50-57.

[360]

Jarrin, N. 2008.“Synthetic inflow boundary conditions for the numerical simulation of turbulence”, Ph.D.Thesis, University of Manchester (UK).

[361]

Jarrin, N., Benamadouche, S., Laurence, D., and Prosser, R. 2006.“A synthetic-eddy-method for generating inflow conditions for large eddy simulations”.International Journal of Heat and Fluid Flow, 27, pp. 585-593.

ALF

[362]

De Laage de Meux, B., Audebert, B., Manceau, R., & Perrin, R. 2015."Anisotropic linear forcing for synthetic turbulence generation in large eddy simulation and hybrid RANS/LES modeling", Physics of Fluids 27 (3), 035115.

[363]

Jarrin, N., Benhamadouche, S., Laurence, D., & Prosser, R. 2006."A synthetic-eddy-method for generating inflow conditions for large-eddy simulations", International Journal of Heat and Fluid Flow, 27(4), pp. 585-593.

[364]

Skillen, A., Revell, A., & Craft, T. 2016."Accuracy and efficiency improvements in synthetic eddy methods", International Journal of Heat and Fluid Flow, 62, pp. 386-394.

[365]

Xie, Z. T., & Castro, I. P. 2008."Efficient generation of inflow conditions for large eddy simulation of street-scale flows", Flow, turbulence and combustion, 81(3), pp. 449-470.